Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]
1st Star pattern 15lbs / then around 22-25lbs when reusing bolts. Are the m6/7/8? I do 30lbs on new m8 bolts
son you're doing it wrong
you have to angle it up so it matches the curve of the ***
so I raise you..DOUBLES
![Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]-33bgcck.jpg](https://g35driver.com/forums/attachments/picture-share/268960d1683124679-aggressive-wheels-stretched-tires-post-em-up-some-nsfw-33bgcck.jpg)
excuse the rear bumper, that's from when the tire came off.. havent had a chance to fix
they are pretty damn loud but not annoying because I still have stock cats and midpipe resonator on
basically what a g35 sounds like with no muffler which IMO sounds 10x than exhausts that cost 2-3x more
Guest
Posts: n/a
I will bend up a little more so it's not so out there Its not even secured for long distance driving yet. At least it fits in the exhaust hole of my diffuser lol.
Mine is straight piped all the way back. Its loud as fawk. May try to get a video tomorrow.
Mine is straight piped all the way back. Its loud as fawk. May try to get a video tomorrow.
275/40/18 on a 18x12 with hankook v12s, i wanna do a 285/30 in some nankangs
well the way u bend them is by angleing them upward and just mountaing the part that is under the car a little lower, so the flange/hangar is lower so it points the tips upward.. also for the exhaust hole take a filer and file away the sides till the curvature is is less pronounced, work on the edges
but damn straight piped all the way.. fml
well the way u bend them is by angleing them upward and just mountaing the part that is under the car a little lower, so the flange/hangar is lower so it points the tips upward.. also for the exhaust hole take a filer and file away the sides till the curvature is is less pronounced, work on the edges
but damn straight piped all the way.. fml