20" work vs-xx (weak offset.not) riley ftmfw
You know, he may be cool and he may know his stuff, but the fact that he tries so hard just to not reveal offsets and comes off as a ***** like he's some kind of wheel god and thinks that saying offsets is gonna ruin his e-dick size. Like figuring out offsets take soooo much trial and error is just pathetic, and he doesn't belong on this forum if he's gonna be like that. I'll tell you what, I pay $4k on wheels I'll do with what I please releasing the offsets.
Not a fan of how the rims stick out of the tire like a Low Rider.....why go with an off set like that when you can't even get the tires to look right on the rim? Yea the rim has a fat lip but the tires look bad on the wheels. More lip is not always the best thing.
so you would rather the rims be tucked in?
How can one claim to be the offset prince/king if they don't have the numbers to back it up? Anyways, I like the fitment on the rears, fronts could be a bit more aggressive.
My guess:
20x10 +11 R disk
20x11 +19 O disk
My guess:
20x10 +11 R disk
20x11 +19 O disk
No, but I am 99% sure it is possible. The outer position of that rim is equivalent to 12"+12 meister's you were looking at on my350z http://my350z.com/forum/6666342-post1.html, and the inner position is the same as a 11"+36 which was run by this 350z http://my350z.com/forum/4307394-post3.html
So clearance shouldn't be an issue. The only thing that may be an issue is that those were sized for 19" wheels, and these are 20", so that is where the 1% chance of not fitting comes in. A small 1-3mm spacer should fix that though if it were an issue. A little bit of math and getting perfect fitment with the widest wheels on a stock body G is not that hard. You could even run a 295 on there stretched and still have a tire wider than 99% of the G's on the road. Honestly, what Riley does isn't that special.
So clearance shouldn't be an issue. The only thing that may be an issue is that those were sized for 19" wheels, and these are 20", so that is where the 1% chance of not fitting comes in. A small 1-3mm spacer should fix that though if it were an issue. A little bit of math and getting perfect fitment with the widest wheels on a stock body G is not that hard. You could even run a 295 on there stretched and still have a tire wider than 99% of the G's on the road. Honestly, what Riley does isn't that special.
