Post your Work T1S!
should i get O disk or A disk for the fronts? Can't decide. Can 20x9.5 +5 A-Disk even clear a BBK or Brembos? If not I might as well get O-Disk for max lip size. Plus i don't think running a BBK with these wheels will look good. It's more of a luxury looking wheel than sporty to me. So I wouldn't think a BBK would look right. I would like to hear your opinions though
a +5 A-disk front will not clear any BBK or Brembo or Akebonos. you'll need at least a 15mm spacer. The rears clear fine. Go O-disk and be done with it. Get max lippage.
dude ny you seriously need to do your homework right
how are you NOT on the work wheels site 24/7 and you want to buy their wheels? seriously search there.. but since you are incapable of doing so here let me give you an example
my specs 20x9.5 -8 A disk
my current lip with the A disk is 115mm=4.5"
if i got O disk in the front it would be 122mm=4.8"
not a big deal
but it will be a big deal when you try to sell those, good luck selling wheels with O disk all around, at least A disk is a little better and look what you gain .3"? as if you will notice it
do your homework on the subject
http://www.workwheelsusa.com/media/w...T1S%20Spec.pdf
how are you NOT on the work wheels site 24/7 and you want to buy their wheels? seriously search there.. but since you are incapable of doing so here let me give you an example
my specs 20x9.5 -8 A disk
my current lip with the A disk is 115mm=4.5"
if i got O disk in the front it would be 122mm=4.8"
not a big deal
but it will be a big deal when you try to sell those, good luck selling wheels with O disk all around, at least A disk is a little better and look what you gain .3"? as if you will notice it
do your homework on the subject
http://www.workwheelsusa.com/media/w...T1S%20Spec.pdf
Last edited by eurodre; Mar 17, 2010 at 04:24 PM.
Cookie monster had O disk all around and had no problems selling his. I don't see what the big deal is. Since I Can't fit a BBK with A disk up front anyways, so might as well get an O disk to get maximum lip size. I don't know, that's just how I see it as.
is it me or this pics looks huge looks like 22" Hollyshzz..
Rim won't tire will if u don't roll your fenders and run a stretch..
actually, the rim lip will hit if you dont roll and do a light pull on your fenders. same specs im running now and i have a slight pull and i rub on the tire. but again, it all depends on how much neg camber you wanna run also.
it also depends on how low the person wishes to be
and since when did this become a "ask wheel questions thread?" isn't there already a thread like that?
oh wait..
https://g35driver.com/forums/wheels-...-ask-here.html
and since when did this become a "ask wheel questions thread?" isn't there already a thread like that?
oh wait..
https://g35driver.com/forums/wheels-...-ask-here.html
