When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Are you using spacers? I have brembos and noticed you do as well and would like to get similar specs with the same wheel but am not sure if I will have to get spacers to clear the brembos. Thanks
Just got my new wheels on, couple of pics attatched.
Maybe it will help someone thinking about getting the varrs.
19" Varrstoens in the matte black finish.
9.5" fronts and 10.5" rears both in the +12 offset
Hancook Ventus V12 Evos
245/35 and 275/35
Iight so I have those exact rims but with a 10inch offset and on the littlest of bumps these Smucker's Will rub on my fenders like they stick out Alot. Not even flush like yours. Any suggestions on what I can do. I don't think rolling the fenders will solve much and I'm not cambering my car
Thanks
Sooooooooooo, FIRST off, that's not how offset works lol. Are you saying your offset is +10 instead of +12, which would be 2mm difference (i.e. no difference) or are you saying your wheels are only 10inches wide? Because those are two TOTALLY different things.
However, FAAAAAAAAAAAAAAAAARRRRR more importantly, are you seriously asking if someone has figured out how to fit off the shelf wheels on a car that has been out for 13 years and discontinued for 7? On this very forum, only inches from where you necromancered this post, is a post with literally THOUSANDS of pages of fitment. Fitment is even in the title. If you mosey on down to the subforum of "wheels and tires", you will see yet another thread with NUMEROUS pages dedicated to FITMENT...it too, has fitment in the title. A page or 2 away from this very page, yet another post dedicated to fitment. Where you to still not be satisfied, there is a forum with cars that are mechanically identical to the ones found here, with, not only similar fitment posts to what's found here, but there LITERALLY a Varrstoen thread. An ENTIRE thread dedicated to cars like ours fitting varrs on to them. It's FRIGGIN AMAZING.
But, is that what you're asking? Because, if it is, then the answer is yes. There are NUMEROUS suggestions on what can be done. I'd try smaller tires. If you don't already have negative camber, lowering it would give it to you whether you like it or not. And based on your post, I'm going to just assume that haven't done any suspension mods let alone supporting mods with lowering. So, yeah. Just get smaller tires and keep rolling.
Iight so I have those exact rims but with a 10inch offset and on the littlest of bumps these Smucker's Will rub on my fenders like they stick out Alot. Not even flush like yours. Any suggestions on what I can do. I don't think rolling the fenders will solve much and I'm not cambering my car
Thanks
