New Nismo Front!!!
Joined: Aug 2008
Posts: 2,548
Likes: 15
From: Murfreesboro, TN
Weight saving any way I can. Bad news the paint lifted again in the shop, IDK what their deal is but they brought in some expert or something they said with a new adhesion promoter and it should be done by Tuesday!
Former G35driver Vendor
iTrader: (37)
I'm assuming its poly urethane..
We sell and paint tons of poly urethane NISMO bumpers.. (see our signature below for LINK)
Print and give your body shop this:
1. Sand edges and seams completely
2. Wash all surfaces to be painted thoroughly with TSP in warm water and scotchbrite pads.
3. Sand surfaces to be painted with 320 wet dry sandpaper. (At this point, you should have a dull scratched appearance.)
4. Clean surface and all edges with either Dupont 2319S or Sherwin Williams R7K157 or R7K158 or equivalent.
5. Fill all imperfections (if applicable) with a flexible putty and sand smooth.
6. Apply adhesion promoter or equivalent Dupont #2322.
7. Note:some painters prefer, after cleaning the surface, to apply Dupont "Variprime". Let dry and scuff with a scothbrite pad.
8. Apply basecoat clearcoat following manufacture's recommendations for painting a flexible polyurethane plastic.
- Eric|CARBODYKITS
We sell and paint tons of poly urethane NISMO bumpers.. (see our signature below for LINK)
Print and give your body shop this:
1. Sand edges and seams completely
2. Wash all surfaces to be painted thoroughly with TSP in warm water and scotchbrite pads.
3. Sand surfaces to be painted with 320 wet dry sandpaper. (At this point, you should have a dull scratched appearance.)
4. Clean surface and all edges with either Dupont 2319S or Sherwin Williams R7K157 or R7K158 or equivalent.
5. Fill all imperfections (if applicable) with a flexible putty and sand smooth.
6. Apply adhesion promoter or equivalent Dupont #2322.
7. Note:some painters prefer, after cleaning the surface, to apply Dupont "Variprime". Let dry and scuff with a scothbrite pad.
8. Apply basecoat clearcoat following manufacture's recommendations for painting a flexible polyurethane plastic.
- Eric|CARBODYKITS
Joined: Aug 2008
Posts: 2,548
Likes: 15
From: Murfreesboro, TN
I'm assuming its poly urethane..
We sell and paint tons of poly urethane NISMO bumpers.. (see our signature below for LINK)
Print and give your body shop this:
1. Sand edges and seams completely
2. Wash all surfaces to be painted thoroughly with TSP in warm water and scotchbrite pads.
3. Sand surfaces to be painted with 320 wet dry sandpaper. (At this point, you should have a dull scratched appearance.)
4. Clean surface and all edges with either Dupont 2319S or Sherwin Williams R7K157 or R7K158 or equivalent.
5. Fill all imperfections (if applicable) with a flexible putty and sand smooth.
6. Apply adhesion promoter or equivalent Dupont #2322.
7. Note:some painters prefer, after cleaning the surface, to apply Dupont "Variprime". Let dry and scuff with a scothbrite pad.
8. Apply basecoat clearcoat following manufacture's recommendations for painting a flexible polyurethane plastic.
- Eric|CARBODYKITS
We sell and paint tons of poly urethane NISMO bumpers.. (see our signature below for LINK)
Print and give your body shop this:
1. Sand edges and seams completely
2. Wash all surfaces to be painted thoroughly with TSP in warm water and scotchbrite pads.
3. Sand surfaces to be painted with 320 wet dry sandpaper. (At this point, you should have a dull scratched appearance.)
4. Clean surface and all edges with either Dupont 2319S or Sherwin Williams R7K157 or R7K158 or equivalent.
5. Fill all imperfections (if applicable) with a flexible putty and sand smooth.
6. Apply adhesion promoter or equivalent Dupont #2322.
7. Note:some painters prefer, after cleaning the surface, to apply Dupont "Variprime". Let dry and scuff with a scothbrite pad.
8. Apply basecoat clearcoat following manufacture's recommendations for painting a flexible polyurethane plastic.
- Eric|CARBODYKITS
Former G35driver Vendor
iTrader: (37)
^ the material is oil based so special prep is needed or else the paint doesnt stick.
No problem 
and yes it does look sickk with the color scheme.. good choice
and yes it does look sickk with the color scheme.. good choice
Thread
Thread Starter
Forum
Replies
Last Post