finally back on the street with the new setup
finally back on the street with the new setup
...basically, i high centered it, buckling the endlinks causing a steamroller effect on the rest of the underside. so, i replaced everything. here's what we got.
previously


current suspension:
rebult the coilovers (d2)
Battle Version rear toe arms
SPC rear camber arms
Megan outer tie rods
Powergrid front and rear endlinks
Hotchkis front and rear sway bars
Cusco front upper a-arms
Energy Suspension Poly Master Kit
GTSpec front tower bar
...and all new ball joints
new rollers:
Varrstoen 1.1.2 19x9.5/11 +0
Conti rubber
exterior:
flat to gloss grill
gloss blk inner headlight housings ('03)
Carbon Fiber air duct inserts for Nismo style bumper
all fenders have been brought out approximately 1.25" and the body line around the wheel arches has been removed
Dzus fasteners used on front bumper and aluminum under pan (painted black to match body)
...that's what i'm working with so far, may have left something out.
current:
previously


current suspension:
rebult the coilovers (d2)
Battle Version rear toe arms
SPC rear camber arms
Megan outer tie rods
Powergrid front and rear endlinks
Hotchkis front and rear sway bars
Cusco front upper a-arms
Energy Suspension Poly Master Kit
GTSpec front tower bar
...and all new ball joints
new rollers:
Varrstoen 1.1.2 19x9.5/11 +0
Conti rubber
exterior:
flat to gloss grill
gloss blk inner headlight housings ('03)
Carbon Fiber air duct inserts for Nismo style bumper
all fenders have been brought out approximately 1.25" and the body line around the wheel arches has been removed
Dzus fasteners used on front bumper and aluminum under pan (painted black to match body)
...that's what i'm working with so far, may have left something out.
current:
WORD TO THE WISE...DON'T you and DON'T let ANY of your friend roll spring branch (Houston area) when you TUCK 19s on a G! ...this is the former daily static ride height I was creeping with...


Trending Topics
i assuming most of the bad bushings and ball joints are the product of running so low for so long. everything in the suspension was under stress and maxed out in it's geometry. i had to modify my coilovers to get them to slam lower.










