Need Help installing Micro DE fog lamps!
Joined: Jul 2008
Posts: 158
Likes: 0
From: miami/west palm beach
Need Help installing Micro DE fog lamps!
Hey im not too great with the lights and electronics.
And I am having a lil trouble finding a good DIY on here with installing fog lamps behind the lower air ducts behind the mesh, so if anyone knows of one i would realy appreciate a link to it. Or if you have some know how on this subject to maybe explain a lil.
Thx!
And I am having a lil trouble finding a good DIY on here with installing fog lamps behind the lower air ducts behind the mesh, so if anyone knows of one i would realy appreciate a link to it. Or if you have some know how on this subject to maybe explain a lil.
Thx!
should be a simple relay, you need to tap 12v+ and - which can be from you head light harness. I would suggest you install it so that they turn on when your stock fogs turn on.
Joined: Jul 2008
Posts: 158
Likes: 0
From: miami/west palm beach
ok im realy not good with lights and stuff on my G. I need to know how to mount and take the bumper of and wiring and such (haha step by step instructonsP...noone has a DIY on here? I coudnt find one on this site...If you have seen one somewhere else i would realy appriciate a link to it or copy and email it to me if i have to have a log in to see it.
Joined: Jul 2008
Posts: 158
Likes: 0
From: miami/west palm beach
def more with the wiring, but just like a general out line on where and how to mount the lamps.
Haha wher eis Socorro? Is that where you are right now? not in FLA?
Haha wher eis Socorro? Is that where you are right now? not in FLA?
Registered User
iTrader: (11)
Joined: Apr 2008
Posts: 443
Likes: 1
From: LB NY, Currently Socorro, NM. HELP ME!!!
nahh, i wish i was in FL, im in NY right now and its freaking 17 degrees outside. brrr....
but yeah, when i have it back ill try to take some pics of the mounting. i basically got self-tapping screws and put them into the aluminum bumper support. i hid the wires between them, then put a relay in the brake box area, so theres just a signal wire from in the car. (recommend this highly, idiot me slightly melted my fuse box... )
as to what to use to switch them on and off though, its up to you. i built a small circuit, so i have two switches. one is on/off, and the other is IGN/Off. "DRL" of a sort haha
but yeah, when i have it back ill try to take some pics of the mounting. i basically got self-tapping screws and put them into the aluminum bumper support. i hid the wires between them, then put a relay in the brake box area, so theres just a signal wire from in the car. (recommend this highly, idiot me slightly melted my fuse box... )
as to what to use to switch them on and off though, its up to you. i built a small circuit, so i have two switches. one is on/off, and the other is IGN/Off. "DRL" of a sort haha
Thread
Thread Starter
Forum
Replies
Last Post





