Recently installed thanks to Howard and his crew at Technosquare! [https://g35driver.com/forums/showthr...7#post2471087]

Overall the mirror looks AWESOME..

You will need to
1. Drill 3 additional holes into the mirror bracket to mount this thing
2. Do some JDM wiring lol (instructions are in japanese)
3. Modify the weather seal so there isnt any interfearance.. IF YOU DO NOT DO THIS YOU WILL EITHER NEED TO GRIND THE MIRROR TO FIT! OR ELSE YOU RISK SNAPPING THE PIECE THAT HOUSES THE TWEEDER - IF YOU DO THIS IS A $75 PART!!!!!!!

Upside is that it looks awesome and its motorized - suppose to be heated but I'll never know (I do not use defrosters due to tint). Theres also a nice blue tint in the mirrors just like the Acura Mirrors

Downside is that you'll need some modification and this is made for a 350z not for us... A BIGG downside is that you will have a BIG blind spot in the driverside I'm assuming these are made for right hand drive.. the Mirror mortors are VERY slow and move in a funky weird way.. they angle either to the left or right when you move it up and down then you need to adjust accordingly.. lastly because they're not made for our cars the LEFT adjustment becomes RIGHT and the RIGHT becomes LEFT (Small problem) but the only thing that pisses me off is the BLIND SPOT!!! I have my mirrors set up so I can see the LEFT and RIGHT side of the car directly - meaning I cant see whats behind me using my side view mirrors but thats what the rear view mirror is for right lol.. but yeah this blind spot is killing but (I HAVE to turn my head now)..

but yeah over all it looks awesome and yep yep big + to TechnoSquare!

TechnoSquare
310-787-0847
22521 Normandie Ave
Torrance, CA 90501


- Eric
626-636-6678

 

any pics?

 

^+1

 

Eric is going to make us wait until Sunday at the T 4 T event to see his new
mirrors. He just wants everyone to rush his car to have a loooook at the
new stuff.......HAHA

 

I've seen those mirrors before congrats on finally getting the time to install them Eric

 

Congrats on the mirrors..but damn, that seems like ALOT of downsides just for some mirrors....blind side increased, slow & akward movement, reversal of the switches, additional irreversible drilling, very delicate installation...you are a much more motivated guy than me but I'm sure they look good now that its all said and done.

 

nice write up, + on the pics. Any pics of the mods you had to make to it?

 

you could've gotten the charge speed mirrors which look similar, are made for the G and are for LHD Nice mirrors though!

 

^ someone found a pix

lol 2 reasons why I do not post pix of the car

1. I dont want it floating around the internet - theres lots of hating *******s out there and I drive my car daily (almost)

2. I dont have a camera =)

Those that went to the SHINE's Meet saw the mirrors.. the additional holes does NOT effect the OEM holes so I can re-install my OEM mirrors back with NP.. I've thought about trasnfering the motor from the factory Mirrors over to the ones I have.. but at the same time I want to keep my factories intact incase I need them for something.. If i ever come across an extra driver mirror I'll try it out =) I've seen this mirror apart before and its not complicated at all.. another solution is that I can make it FIXED in one spot so its no longer adjustable but it gets rid of my blind spot (I never adjust the driver side anyways.. Only the passenger side when parking).. so =) I held off on posting a review about these until I was adjusted to them.. the drive from technosquare back to my place (over 60miles) at night was scarry as **** tho lol

- Eric

 

I like the look. A closer shot of the mirror would be nice though.

 

yup...but yea im in the same situation....no camera....

 

idk but i dont think they look right on the G...

 

if it helps my projector headlights are suppose to have a black housing lol.. right now im running the beaters lol

btw beebo your emblem is being shipped out today

 

Hey Klumzyee,
How do those stillen side skirts line up with your TS front bumper? Do you think the stillen skirts will line up with a Kuruma Z bumper?