I never thought I was going to do this, but I am thinking of selling my super reliable Vortech Polished kit. I am thinking of going with TT, so obviously the Vortech has to go.

This kit has been rock solid since day one. I've never had any mechanical problems with it at all. It comes with extra belts, all new idler pulleys, all new jackshaft bearings. The unit was inspected by Vortech and everything was great. This is a full kit that comes with Split Second Engine Management, Vortech Aux. Fuel Pump, Vortech FMU, Spearco Intercooler, hoses, clamps, fuel/oil lines, blower, bracket, etc. Simply plug and play kit. I've ran the stock 3.33 pulley since day 1, so the blower was never abused. Even the intercooler is in like new condition, since it was covered by the stock bumper the whole time. If you want to see the real potential of this kit, I suggest going with bigger pullies for more boost. It has less than 10k miles on the kit. Condition is good for everything that it comes with. Blower has normal wear scratches on the metal that polished metal gets. It's almost impossible to keep polished metal scratch free. The are some deeper scratches on the underside of the blower from installation, but they are not visible once in the engine bay. Unit will be taken off within the month, sooner if I get a deposit from someone.

JWT Oil Pan spacer pre-tapped for oil return also included.

I also have an extra custom machined 2.87 pulley that I was going to use. I can throw it in for a little more $$$. This is not the Reichard Racing pulley that eats belts. It's a custom CNC machined pulley and has been proven to have no slip and little wear on belts.

Price: $3500. Located is Socal for local pickup.

 

is this for non-rev up or rev up?

 

Non-Revup. You would need to buy a new bracket to fit the Revup models.

I also forgot I had a 3-gauge A-pillar pod that's included.

 

Any gauges with that pod?

 

No gauges, just the pod.

 

How much does this bracket cost?
I sent an email to vortech months ago asking about this and got no response.

 

Probably a couple hundred at most. Call them directly for a more accurate response. They seem to lag a little with email.

 

How many difficulties involved to make this compatible with a 05 revup sedan?

 

would this fit an o4.5 at?

 

Yes, direct fit to any non-revup model VQ. PM me alphamatt if you are serious and we can work something out. I prefer someone local, and you're pretty close.

If you wanted this to fit to a revup, you would need a new bracket at least. Call Vortech directly, but I am sure it's not more than a few parts to make it work.

 

Bump. Make me an offer.

 

Are you willing to ship this kit? What else is needed to run this kit? Do you have any other pics? send me a pm if it is easier.

 

You won't need anything else to run this kit. I guarantee that you will not be missing any little thing with this kit, comes complete.

PM sent.

 

JWT Oil Pan spacer that is pre-tapped for oil return is also included. No need to drill any holes into your block!

 

hp/tq?