Hi Guys

B2 Auto Designs is offering Ichiba Spacer kits in two different verisons.

First is the Standard Spacer with longer studs.

Ichiba Wheel Spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

All are Sold as one pair (2pcs) with 10pcs of longer studs.

Offered in

5mm, 10mm, 15mm, or 20mm Kits

To Order
Ichiba V1 5mm: http://www.b2autodesigns.com/product...roducts_id=320

Ichiba V1 10mm: http://www.b2autodesigns.com/product...roducts_id=321

Ichina V1 15mm: http://www.b2autodesigns.com/product...roducts_id=322

Ichiba V1 20mm: http://www.b2autodesigns.com/product...roducts_id=323






The Second Verison come with the studs already in the Spacer, This kit would require you to take a look at the Wheels you have to make sure that the back pad of the wheel (where the lugs go through) have indentations next to it, allowing the left over factory stud to come through.

Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers are two pieces design with pressed studs. Now it's time to bolt-on without any swap studs hassles. These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

To Order
Ichiba V2 15mm:http://www.b2autodesigns.com/product...roducts_id=314

Ichiba V2 20mm:http://www.b2autodesigns.com/product...roducts_id=315

Ichiba V2 25mm:http://www.b2autodesigns.com/product...roducts_id=316

Ichiba V2 30mm:http://www.b2autodesigns.com/product...oducts_id=2755

Ichiba V2 38mm:http://www.b2autodesigns.com/product...oducts_id=2756

New sizes offered Also offered in 17, 22, 27, 32, 35mm All in stock ready to ship. Pm me for pricing








Please PM me for pricing and question about the best spacer size for you G.


If you are in Central Florida area, and would like me to help you make your G have the best stance possible, or if you need fender Modification to help with you current wheels or spacers. Please email or call me. I have been doing Fender Modification for many years and on a wide variety of cars.



Thanks
Charles

 

New product from Cusco.

Cusco has just released their new Smart Cross Wrench. Easy to use, extremely portable, yet effective at an affortable cost. The cross shaft becomes one piece, so no more clanking tools in the trunk! Made from long lasting durable material and used by Cusco's professional Rally team.



$64.99 shipped

Link to order:
http://www.b2autodesigns.com/product...oducts_id=4867

 

all pm sent

Thanks
Charles

 

all pm set

Thanks
Charles

 

Bump

Thanks
Adrian

 

all pm answered.

Thanks
Charles

 

bump,

Thanks
Charles

 

bump,

Thanks
Charles

 

all pm sent

All kits in stock ready to ship.

Thanks
Charles

 

All pm sent

Thanks
Charles

 

no 5 or 10mm in v2?

 

Sorry only offered in V1 5mm and 10mm.

Thanks
Charles

 

All pm sent

Thanks
Charles

 

all pm answered.

Thanks
Charles

 

I would like to order...but I need suggestions. Let me know if you can help.