so imma give it bout 2-3 weeks before i make the ultimate decision....the_coupe's official part-out but i'm doing this as a feeler to see who would be interested in what.....before i go make a thread in the marketplace

Built vq35de with less than 2k miles: $5000
-11:1 96mm cp pistons
-manley rods
-acl bearings
-revup oil pump
-balanced bottom end
-stillen crank pulley with new oem belts
-port matched heads
-bc 264 cams
-bc springs and ti retainers
-hr headgaskets
-hr headbolts
-new water pump
-new tstat
-new tchains, guides and tensioners
-qx4 coolant pipe mod
-coolant bypass hoses deleted
-comp clutch stage4 clutch kit
-comp clutch lightweight flywheel


-freshhh ob v2 poly nismo front $450
-ob painted oem grill (trade for stock+$$)
-ob painted 06 headlights with 10k bulbs/3k fogs (trade for 03-05+$$)
-ob painted/tinted taillights (trade for stock+$$)
-custom 3" single apexi n1 exhaust $400
-tanabe df210 lowering springs $150 shipped
-md 5/16" plenum spacer (all ss hardware/cheapest found is $192 shipped on ebay for basic kit) $170 shipped
-afe stage2 intake $250 shipped
-MR long tube headers $200 shipped
-black samco ztube $80 shipped
-aem uego dual channel wideband kit $350 shipped
-nismo shift **** $40 shipped
-custom jl system fit for a coupe $800
-ichiba v2 25mm spacers (2 pairs) $95 shipped/pair

 

Interested in the spacers... U wouldn't happen to tave the stock shift **** do you?? Mines all torn up

 

details on custom JL system?

 

the stock shift **** will be on the car as i will be bringin the car back to stock form.

and i have 2 pairs of spacers in A+ condition.

the system is a custom built ported box that houses a freshly reconed 10w6v2 (had it done by jl 2 months ago). it is powered by a 500/1 amp and next to that is a 300/4 that is for the in-cabin speakers. the amps are mounted on the backside of the box and a custom carpeted wall fills the empty spaces so the trunk has a super clean custom look. and the wiring is all JL as well.

 

Argh, so tempting, but I'm already in a money crisis with my suspension x_x.

Are both pairs of your spacers 25mm? Got an idea on how much you'd want for a pair?

 

how much for the md 5/16" plenum spacer shipped to 95747?

 

Damn, too bad for me the Nismo front isn't Brilliant Silver.

 

maybe the grill

 

added prices. no shipping obv for the bigger items. located near greenville/clemson, SC. the prices are there but I AM NOT trying to sell anything ATM. IF you want to be the taker of the item WHEN/IF i part-out....cool, just lmk and ill make the note. just seeing the interest i have in all my parts so i know i can make some of my money back.

 

btw, all the painted stuff is painted OB in a bodyshop. no rattle can shiz here. the grill is in awesome shape. the bumper is in awesome shape, just a couple scrapes on the bottom side, the tails are painted on the top half and smoked on the bottom half (will try to find pix that show exactly what im talkin about) and the headlights are ***** as well minus a tiny run spot in the paint on the RH headlight and it started to yellow just a tad on the inside edge but i put some polish to it and it looks great now.

 

in for pics!!!

 

interested in the shift ****. would like to see a pic of it.

 

the shift **** looks like it was a chrome one, but has an overall satin looking finish to it. lol and i dont have the rubber spacer that goes under it.


the system:



motor/headers:


afe intake/md spacer/jdm batt cover:


neezmo front/grill/lights:


tails/exhaust:


aem twin channel uego:


custom apexi n1 exhaust/tanabe springs:

 

I probably would be interested in the lights depending on the condition, how much cash on top and if you are willing to ship

 

hows the intake? better then just ztube/pop charger? looks pretty clean tho