as the S.A. guys know i had a CEL after Devon and I did the test pipe install. You were right about the exhaust leak. I burnt 1/3 of the gaskett due to the leak. After driving all over the city I finally got another gaskett from the Infiniti dealership. I put the new one on, secured eveything down and did a test start. felt around the seal and no leaks but the CEL was still on. I took it Autozone to check the code yesterday and they told me it was the TPS(throttle position sensor). back to today about 20 miles after the new gaskett was on I suppose the ECU re-evaluated and the light turned off. No more rasp and everything is working great!!!! I messed with a mustang cobra tonight...boy was he surprised when he took off and looked back and I was still there!!!!! Thanks Devon for the install

 

Glad to hear that!!!

 

sounds good. what model cobra was it

 

it was the 03-05 body style

 

non s/c.. right?..

 

The 02 looked the same, but was not SC. Just DOHC

 

could have been an 02

 

ya it musta been like a 99-02 because they had the DOHC and the 2003+ had a SC, and the g35 woulda been nowhere near him lol

 

thanks for killing my steam lol, its still fun to hang and beat V8's, always puts a smile on my face

 

here are a few pics of the install, sorry it took so long!!!

 

your engine bay doesn't look anything like mines???? seems to set lower than mines.

 

How hard was it to put on? and how long did it take you?

 

the spacer and MREV is about an hour to 2 hour install. the test pipes are tougher due to the placement of the bolts and about a 2 hour install on their own.

 

I wanna get my megan test pipes but i dont want that CEL light coming on for me.. where and how can i get the 02 sensors that u have? i saw them on ebay ...
http://cgi.ebay.com/ebaymotors/O2-Se...ayphotohosting

but what about all the atachment to the original 02 sensors? can anyone help me?!

 

your stock O2 sensor works fine. im guessing by your screen name you have an 06 so you may need to get 2 pair of Non-Foulers(4 total). 1 pair needs to be drilled out with a 1/2 inch drill bit. If your here in SA than I can do the install as I have done another since doing my own. As long as you have the non-foulers and no exhaust leaks than you shouldn't have a CEL.