K everyone pitch in $40 and i'll hire some gogo dancers -_-

eh my grilfriends going to be detailing HER car half of you have gfs and the other half are married -_- lol

- Eric

 

so what? who says we can't look?

can we eat the cake of the girls?

 

haha!! Now you are talking!! Let's get some strippers to wash our G's!!

 

Can you do the C service for the MB and that stupid thing about the HID fog? Only if you can do it if not it's all cool. LMK I can bring 5lbs of karne asada to BBQ if you can do it. hehe! Little bribe to help the cause.

 

eric, treat the man well! he's got FOOOD!

 

GLENN sorry i missed you that day.. I need the Mercedes Computer do to that and I only have that at work.. if you pick another day I can take care of it for you..

 

Eric, can you do brake and light inspections for the DMV? How about smog hookups? I need to get a car (totally legal, just getting salvaged) inspected asap. Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Oh, and let me know what needs to be done to the bike, and I'll let you know if I can help.

 

NP when are you at the dealer so I can make arrangements? PM or something so we can set an appointment. LMK. Thanks

 

wed after 5 would be prefer i get off at 5:30

 

eh nope.. i can do smogs but its expensive.. it'll be cheaper of u take it to like a gas station smog only for $20..

Bike: EVERYTHING.. Just to make sure maintenace is up to date
Spark Plug
Spark Plug Wire
Oil Change
New Chain

what do u recommend its an 02 gsx 1000

- Eric

 

eric im going to be at your house at 7 am

 

k.. but i'll still be sleeping.. just park somewhere and i'll leave the hose and bucket and soap in the back yard with the dog

- Eric

 

Def go with Iridium spark plugs (NGK are great). Make sure they're properly gapped.

Oil change for sure; make sure you know if he wants to run dino or synthetic, what the proper weight is, and don't use any of the friction-reducing crap for cars; Motul and Repsol are popular. Definitely should replace the filter as well. Just fill it up, run for a few minutes, then fill back up to the proper level (usually read the oil level glass with the bike standing straight up, but NOT on the rear stand).

New chain, he should do new sprockets as well at the same time, as worn sprockets destroy new chains. With that, you need master link removal tool, and the one to press the new one in. Also need a rear stand so you can get the weight off the rear end. You'll need proper chain wax/lube (not WD40) to lightly grease up the change; tell your buddy to clean it every 4-500 miles with kerosene, when the chain is warm, then re-apply the wax.

New air filter would be good if it hasn't been done in awhile. Also, just make sure the idle speed isn't funky (they can get outta wack sometimes). Check throttle and clutch cables for tautness, and tighten if necessary. Besides that, go over all the bolts on the frame to make sure none are loose. Remember, these bikes are almost all aluminum, so don't over-tighten ****!

Check the tires to make sure they don't have any rot, and aren't showing the belts in the middle (or no tread left). If this is the case, bitchslap your friend, and send him off to get new tires.

Last important thing I can think of is to check the brakes. They should be nice and firm, and the brake fluid should be pretty clear. If it's not, the system should be flushed and vacuum bled (bleeder screws are in both calipers and the MC for the front).

That's what I can think of for now; this is pretty important ****, esp. if the bike hasn't been maintained in awhile. Shoot me a PM if you have any questions.

 

1. Mike's JP Rims needs to get fixed first
2. My OEMs for G and Acura TL
3. Ahero4eternity (calvin) bulbs (washing my dog)
4. MaidenG35 - S.F. Challenge repair
5. ohsobad (alex) - bbqing haha =P
6. Hexxum001 (hector) - letting us help him break in the car again from GTM =P
7. Yume (anh) - 20" Rim Repair (Bring food)
8. imalazeeass (mike) - picking up his rims and giving us a ride in HIS S/C G
9. G2Fast (josh) - iono ._.
10. UnluckyCharms (helping me with the bike lol)
11. richiesays - adjusting hood and bringing food =P (its a 14mm btw)
12. driftgt350 - helping calvin wash my dog
13. Gunmetal35 injen exhaust if it arrives by Friday

Hopefully my exhaust will be here by friday then I'll attend the meet...

 

LMFAO!!