Southern California San Diego, Los Angeles, Orange County, Inland Empire, etc.

shocks/spring Installer needed in O.C.

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 05-12-2005 | 06:26 PM
IPon6MT's Avatar
Thread Starter
|
Registered User
Joined: Apr 2005
Posts: 244
Likes: 0
From: The OC
shocks/spring Installer needed in O.C.


Does anybody have a reputable shop that they visit to install shocks/springs? I need to have FLEX's installed but im not sure where to get them installed.

or is there a DIY for installing FLEX? .. . yeah right.. just kidding..

Thanks,

.:IPon6MT:.
 
  #2  
Old 05-12-2005 | 09:24 PM
SoCalTed's Avatar
Registered User
iTrader: (2)
Joined: Apr 2003
Posts: 3,165
Likes: 0
From: Kalifornia
not the OC... but if you live in the North County, close enough.

Give Nat or James a call at Vision Autosports in Hacienda Heights.

60 Fwy, exit Hacienda Blvd and go north about a mile or so, just east of Gail

(626) 336-8388
1003 S Hacienda Blvd
Hacienda Heights, CA 91745

Cheers, Ted
 
  #3  
Old 05-12-2005 | 10:42 PM
vleo8181's Avatar
Premier Member
Joined: Feb 2005
Posts: 802
Likes: 0
From: Long Beach, CA
Premier Member
Or streetimage....
 
  #4  
Old 05-13-2005 | 01:26 PM
Kamal34's Avatar
Registered User
iTrader: (1)
Joined: Jul 2003
Posts: 1,825
Likes: 0
Good place in Redondo Beach on the 405 and Artesia exit. The place is called Elite Auto Performance and he does really good work. Give them a call at 310-370-0377. Talk to Inzo who is the owner there. Hes a good friend of mine so tell him I sent you, my name is Kamal. Anyway, he'll take care of you. He did my install.
 
  #5  
Old 05-13-2005 | 01:35 PM
SoCalTed's Avatar
Registered User
iTrader: (2)
Joined: Apr 2003
Posts: 3,165
Likes: 0
From: Kalifornia
Street image is in Baldwin Park... great guys, but a little far from OC.

-T
 
  #6  
Old 05-13-2005 | 03:41 PM
jim@streetimage's Avatar
Registered User
Joined: Dec 2004
Posts: 95
Likes: 0
We are not that far from OC . Bring it to SI you will be happy with our work
 

Last edited by jim@streetimage; 05-13-2005 at 03:48 PM.
  #7  
Old 05-13-2005 | 03:43 PM
FluxG35's Avatar
Registered User
Joined: Jul 2003
Posts: 298
Likes: 0
From: CA/HI
street image..!!!
 
  #8  
Old 05-13-2005 | 05:46 PM
IPon6MT's Avatar
Thread Starter
|
Registered User
Joined: Apr 2005
Posts: 244
Likes: 0
From: The OC

Thank you to all who have responded!! I greatly appreciate it..

I would love to take my G to SI, Vision or Elite, but it's a little out of ways for me.... 1hr drive...

I found Dynamic Autosports in my neck of the woods, who will install them for me for a pretty good price. They said the install should take 2-2.5 hours. Yippee!!!

Im glad that Dynamic Autosports was so inclined to helping me out, it looks as if I just found my second home and will be ordering all my upgrades for my G from them..

I was actually turned away from American Motor Sports (BuyAMS.com) because I did not buy the TEIN FLEX's from his shop. c'mon.. geez..

oh well, i guess i'll just purchase my future parts from Dynamic instead.

.:IPon6MT:.
 
  #9  
Old 05-13-2005 | 06:56 PM
Nickk6's Avatar
Registered User
iTrader: (2)
Joined: Jan 2005
Posts: 1,936
Likes: 4
From: Laguna Niguel, CA
Dynamic is a bit expensive, but if you do not mind their high prices, then go for it.
 
  #10  
Old 05-13-2005 | 07:20 PM
IPon6MT's Avatar
Thread Starter
|
Registered User
Joined: Apr 2005
Posts: 244
Likes: 0
From: The OC
Originally Posted by Nickk6
Dynamic is a bit expensive, but if you do not mind their high prices, then go for it.

Actually, the prices I have recieved from Dynamic have been lower than BuyAMS and what Dynamic quoted me for FLEX installation was $120.. It's not too
bad.

where do you purchase/install your upgrades at in the OC? If you have other sources, I will be glad to follow suit..
 
  #11  
Old 05-13-2005 | 07:33 PM
R2 V35's Avatar
Registered User
Joined: Dec 2003
Posts: 1,915
Likes: 3
From: O.C.
Originally Posted by IPon6MT

Actually, the prices I have recieved from Dynamic have been lower than BuyAMS and what Dynamic quoted me for FLEX installation was $120.. It's not too
bad.

where do you purchase/install your upgrades at in the OC? If you have other sources, I will be glad to follow suit..

Yeah I got mine done @ Dynamics. Cool peeps! $120 is really cheap, is that with the EDFC?
 
  #12  
Old 05-13-2005 | 07:36 PM
Nickk6's Avatar
Registered User
iTrader: (2)
Joined: Jan 2005
Posts: 1,936
Likes: 4
From: Laguna Niguel, CA
Originally Posted by IPon6MT

Actually, the prices I have recieved from Dynamic have been lower than BuyAMS and what Dynamic quoted me for FLEX installation was $120.. It's not too
bad.

where do you purchase/install your upgrades at in the OC? If you have other sources, I will be glad to follow suit..
Honestly, their prices use to be outrageous about 3 years ago so I never went there after that and I would usually wait for a free saturday and make the hike up to LA. I am actually glad to hear their prices are resonable now, if the need arises I would just go there, I know they do good work.
 
  #13  
Old 05-13-2005 | 07:42 PM
IPon6MT's Avatar
Thread Starter
|
Registered User
Joined: Apr 2005
Posts: 244
Likes: 0
From: The OC
Originally Posted by fXg35rIdA
Yeah I got mine done @ Dynamics. Cool peeps! $120 is really cheap, is that with the EDFC?

Yeah, Danny @ Dynamics is a cool guy.. Really helpful..

nah. no EDFC.. Danny said, that if I were to get the EDFC, then it may be a little bit more expensive, cause there's more wiring involved. If I need it, i'll just get it later.. no biggie..

Do any FLEX owners have the EDFC installed??? If so, did you really need it or use it alot to alter dampening settings?

For those FLEX owners that did not install EDFC, any regrets?
 
  #14  
Old 05-13-2005 | 08:13 PM
G354GOD's Avatar
Registered User
Joined: Jun 2004
Posts: 929
Likes: 0
From: Orange County, California USA
Yeah... I know Danny.... ask him if they got the dyno set up yet...

Tell him that Mark with the IP Twin Turbo Coupe wants to know.....
 
  #15  
Old 05-13-2005 | 08:21 PM
IPon6MT's Avatar
Thread Starter
|
Registered User
Joined: Apr 2005
Posts: 244
Likes: 0
From: The OC
Originally Posted by G354GOD
Yeah... I know Danny.... ask him if they got the dyno set up yet...

Tell him that Mark with the IP Twin Turbo Coupe wants to know.....

actually I asked somebody else at Dynamics about their dyno, and they said "YES, they do have the dyno.. but, there's no door that leads to the dyno to pull cars in and out of the building.".. go figure.. but they did say that a door would be put in by month end..

Im also hoping they are able to pave the parking lot by months end also..

ohh.. an IP with TT.. nice! I wanna see... I will be at Dynamics next week if you wanna come by.. I wanna see your car! if you want..
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 05:42 PM.