FS NorCal: 350z h-tech - Page 2 - G35Driver - Infiniti G35 & G37 Forum Discussion

Oct 23, 2013 | 02:21 PM

#16

Xet

Thread Starter

Registered User

iTrader: (8)

Joined: Jun 2008

Posts: 4,197

Likes: 171

From: sj

Quote:

Originally Posted by Shawno72

Also did you have to ad camber arms with theses springs?

Most people don't have to add camber kits to get back into stock spec with zhtechs, but it really is the borderline drop before camber kits would be needed. So some people do end up needing camber kits, while others, like myself, were able to get away with aligning with the stock setup. I personally never saw too much of a difference in tire life due to a bit of excess camber with these springs, or my later setups, as long as I had my toe set in spec when I realigned.

Oct 23, 2013 | 02:23 PM

#17

Xet

Thread Starter

Registered User

iTrader: (8)

Joined: Jun 2008

Posts: 4,197

Likes: 171

From: sj

Quote:

Originally Posted by Shawno72

Thanks that helps a lot.
Edit: it appears that the h techs have the same drop that my factory sport springs have? I may want something lower.

I went from 05 revup stock springs to these and I definitely had a significant drop in ride height with these. They also drop more than the normal g-htechs would since it is the 350z version.

Oct 23, 2013 | 02:24 PM

#18

Shawno72

Registered User

iTrader: (11)

Joined: Oct 2013

Posts: 1,254

Likes: 78

From: Cali

Quote:

Originally Posted by Xet

I went from 05 revup stock springs to these and I definitely had a significant drop in ride height with these. They also drop more than the normal g-htechs would since it is the 350z version.

Ok. I'll take them. You available this Saturday afternoon for me to pick them up?

Last edited by Shawno72; Oct 23, 2013 at 02:48 PM.