FS[NorCal]: Tein S-tech w/ TOKICO D-spec + top hats rtr
Tein S-tech w/ TOKICO D-spec + top hats rtr
I have a set of G35 Tein S techs mounted on Tokico D-spec for sale.
Its already on stock top hats ready for install
The Tokico D specs with tein H tech were on my car for 4k miles
before i swapped to Tein CS which i have sold already.
Then i lend it to my friend which he mounted G35-S tech
on them and drove almost 6k miles on them
So total miles on the Tokicos are 10k and the springs are 6k
no noise, not blown at all.
one minor defect is that one of the front dust boots is
ripped as you can see in the last picture
I also took a close up picture of the tein prints to verify they are real!
SOLD




Its already on stock top hats ready for install
The Tokico D specs with tein H tech were on my car for 4k miles
before i swapped to Tein CS which i have sold already.
Then i lend it to my friend which he mounted G35-S tech
on them and drove almost 6k miles on them
So total miles on the Tokicos are 10k and the springs are 6k
no noise, not blown at all.
one minor defect is that one of the front dust boots is
ripped as you can see in the last picture
I also took a close up picture of the tein prints to verify they are real!
SOLD




Last edited by YT35; Dec 2, 2012 at 04:21 PM.
Some info i got from the suspension tech area about the S techs drop:
Tein S-tech G35(fronts are progressive, rears are linear) coupe drop 1.2"/.9" sedan drop 2"/1.3"
Spring rates in LBS 358/274 (final rates only, softer intial front progressive rate unknown)
Tein S-tech G35(fronts are progressive, rears are linear) coupe drop 1.2"/.9" sedan drop 2"/1.3"
Spring rates in LBS 358/274 (final rates only, softer intial front progressive rate unknown)
Trending Topics
i just want to sell all together, don't want to go through the hassle of taking them apart. you can always sell the S techs and top hats if you don't want them, should be an easy sell


