Here are there coilover kits for the G35 Applications:
New from Tanabe. Tanabe is SUSTEC PRO Z40
Sustec Z40 Coilover is a brand new Coilover system made by Tanabe.
Sustec Z40 uses advanced dampers made by KYB and offers fully adjustable ride height, 40-way dampening adjustment, and a twin tube design. Made and tested on every vehicle application to meet the maximum performance and direct fit.
03-07 G35 coupe/sedan Application.
Tanabe Sustec Pro FIVE kit G35 coupe/sedan Spring rate 10k front and 8k rear.
Sustec Pro FIVE delivers broad performance for the track to the streets. Featuring 12-way(16-way with TEAS) front & rear adjustment, FIVE allows drivers to fine tune height, dampening and rebound based on street conditions and driver preference.
Tanabe Sustec Pro CR Coilovers 03-07 Infiniti G35 Coupe (V35) and 07+ G35 sedan/09+ G37 coupe/sedan.
Spring rate 10k front and 8k rear. No dampening adjustment. Great smooth ride.
Tanabe Sustec Coilovers - Pro CR: Tanabe is proud to announce its latest suspension system; Sustec Pro CR Suspension Kit. This suspension system features a damper with “Non-Preload Valve” Mechanism that was developed in collaboration with well-known damper manufacturer KYB and Tanabe’s high quality Pro210 Series coil springs. The Sustec Pro CR utilizes twin-tube, low pressure gas dampers for unrivaled comfort and durability and put through a rigorous 100,000km / 1,000,000 stroke test to ensure this suspension will perform and meet the standards set by Tanabe’s Previous suspension systems.
TANABE SPRINGS KITS.
Tanbe DF210 Springs:
For the show or on the street, Dress-Up Form provides a clean aggressive drop while maintaining smooth ride quality. The DF210 line of springs enhance the appearance by lowering the vehicle 2~2 1/2in (50~60mm) without sacrificing comfort. Ride quality is improved by raising the spring rate 10~15%
Tanabe DF210 springs G35 Coupe 03-07:
Drop: 1.7" F and 1.3" R
Tanabe DF210 springs 03-06 G35 Sedan:
Drop: 1.7" F and 1.5" R
Tanabe NF210 Infiniti G35 07+G35 Sedan RWD
Drop: 1.4" F and 1.4" R
Tanabe NF210 Springs
Normal Feeling is for those who wish to lower their vehicle, while maintaining the comfort of the stock suspension. NF210 lowers the vehicle an average of 1 1/4~1 1/2in (30~40mm) without sacrificing the stock ride quality. This is achieved by raising the spring rate no more than 10%
Tanabe NF210 Springs G35 Coupe 03-07:
Drop 1.0" F and .6" R
Tanabe NF210 Infiniti G35 07+Sedan RWD:
Drop: 1.1" F and 1.3" R
Tanabe NF210 Infiniti G35 03-06 Sedan:
Drop: 1.6" F and .9" R
NF210 Spring Kit Infiniti G37 Coupe 2008
Drop: 1.0" F and .7" R
Tanabe GF210 Springs
Trace your favorite racing line with the performance-oriented GF210 series springs. Featuring increased spring rates of 20-30% over stock, Grip Feeling is more oriented towards performance. Lowering the ride height 1 1/24 to 1 1/2in (30-40mm) gives the car an aggressive stance, while providing a lower center of gravity for an increased amount of turning stability.
Tanabe GF210 springs G35 Sedan 03-06
Drop 1.5" F and .9" R
TANABE GF210 SPRINGS: G35 SEDAN 03-06
Drop: 1.3" F and .9" R
Please pm me or call with any questions you might have. Also I carry the full line of Tanabe products feel free to pm me on any product offered by Tanabe.
Also, is it possible to use the Z setup for the S-0C type II? For some reason they have the same part number but does not show a ride height adjustment for the G, only for the Z.
Basically I'm looking for any of the S-0C setups that have ride height adjustability. I thought we had the same setup as the Z, minus the 1/2 inch difference.
