Auto Warehouse Suspenion Sale
Auto Warehouse Suspenion Sale
2003-2007 Nissan 350Z and G35 Suspension Components
TEIN Coilovers
Basic Coilovers: DSP26-LUAS2 ASK FOR PRICES
Spring Rates: F/R 500
Mounts: NO
Adjustablity: Height only
EDFC: NO
Picture of Kit
Comfort Sport: GSP24-KUAS3 ASK FOR PRICES
Spring Rates: F/R 392
Mounts: Reinforced Rubber
Adjustablity: Height and Dampening
EDFC: YES
Picture of Kit
Flex: DSP26-6UAS1 ASK FOR PRICES
Spring Rates: F/R 392
Mounts: Pillowball Adj. Front Rubber Rear
Adjustablity: Height, Preload,& Dampening
EDFC: YES
Picture of Kit
Mono Flex:GSP24-FUAS1 ASK FOR PRICES
Spring Rates: F/R 783
Mounts: Pillowball Adj. Front Rubber Rear
Adjustablity: Height, Preload,& Dampening
EDFC: YES
Picture of Kit
EDFC (Flex or Mono Flex): EDKU4-K4469 ASK FOR PRICES
The Tein EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force by controlling a motor installed in the shock absorber while being seated in the driver's seat.
Picture of Kit
Tein Tie Rod & Tie Rod End for 03-07 350Z & G35 Coupe
Strengthened Tie Rod, Advanced Durability, Increased Steering Wheel Cut Off Angle, A Brilliant Option for Drifting! Tein Tie Rods and Rod Ends fit both the 350Z and the G35. Over 30% Stronger than the OEM equipment and custom made for the 350Z and G35 for a perfect fit. These Tein rods are 5mm longer which will improve steering wheel cut off angle and improve your overall suspension. You need to purchase 1 Rod Ends and 1 Rods to cover the front right and front left of your application.
An Important Note: Tein tie rod and tie rod ends can NOT be used in combination with the original equipment tie rod and tie rod ends.
FITMENT: 03-07 350Z (including Convertible), 03-07 G35 Coupe (including 4 Door)
PM FOR PRICES
Cusco Zero Series Coilovers for 03-07 Nissan 350Z
Zero-1 w/Rubber Mounts OR w/Pillowball
Picture of Kit
Spring Rate (Lb/In): F: 559 / R: 392
Adjustments: Height & Pre-Load Only
Drop Range (inches): F: 0" to -1.2" / R: 0" to 1"
Cusco's Suggested Drop: F: -.8" / R: -.8"
ASK FOR PRICES
Cusco Zero-1 Coilovers for the 03-07 Nissan 350Z are an entry-level system designed with ride comfort in mind. They feature ride-height adjustability with pre-set dampening rates. Cusco designed the Zero series coilover for the 350Z as an alternative to expensive lowering spring and shock combinations. Cusco Zero-1 coilovers help reduce bump-steer and suspension bottoming by offering a properly valved spring and shock combination for your Z. The Zero-1 coilovers use the same hardware as the Zero-2 system, so the damper can be upgraded to the Zero-2 adjustable damper at a later time. For reliability, the Zero-1 coilovers feature stainless hardware and an anti-rust coating on the shock body and springs.
The Zero-1 for the 350Z is available in two versions: With or without pillowball front mounts. The 'Normal' set includes rubber mounts and the 'Pillowball" includes adjustable aluminum mounts for the front and non-adjustable aluminium mounts in the rear for improved control and feel.
NOTE: Pillowball equipped coilovers are a special order
Zero-2 w/Rubber Mounts or w/Pillowball
Picture of Kit
Spring Rate (Lb/In): F: 559 / R: 392
Adjustments: Height, Pre-Load & Dampening
Drop Range (inches): F: 0" to -1.2" / R: 0" to 1"
Cusco's Suggested Drop: F: -.8" / R: -.8"
ASK FOR PRICES
The Zero-2 coilover system is designed as a street/track setup for the 03-07 Nissan 350Z,with ride height, pre-load and 5-position dampening force adjustment for extreme versatility. The Zero-2 coilovers are the same as the ones used in the Zero-1 system but with the adjustable shock absorbers for dampening control. Settings 1 and 2 are ideal for normal driving, 3 or 4 for higher-grip tires or more aggressive driving, and 4 or 5 are for competition tires on a track. Like the Zero-1 system, the Zero-2 coilovers for the 350Z feature stainless steel lock nuts, spring seats, and anti-rust coating on the shock body and springs.
Also, like the Zero-1, the Zero-2 is available in two versions: With or without Pillowball front mounts. The 'Normal' set includes rubber mounts and the 'Pillowball' includes adjustable aluminum mounts for the front and non-adjustable aluminium mounts in the rear for improved control and feel
NOTE: Pillowball equipped coilovers are a special order
Eibach Pro-Kit and Sportline Kit for 03-07 350z
Eibach springs are on average 2.75 pounds lighter than the competition. This reduction of unsprung mass is equivalent to removing 50 pounds from your car! All Eibach springs come with an unbeatable Million Mile Warranty.
Pro-Kit
Drop (Inches): F:-1 / R: -1
Sportline Kit
(Does not fit
Convertable or Roadster)
Drop (Inches): F:-1.2 / R: -1.2
Tokico D-Spec Extra Wide Adjustable Shocks for 2003-04 Nissan 350Z
The capability of the D-Spec adjustable shock to be such a multi-use product, results from a sophisticated piston and valving design, combined with a unique variable-aperture bypass controlled by an adjustable slide valve. D-Spec adjustments change both rebound and compression damping simultaneously. Between the hard and soft settings, the D-Spec is infinitely adjustable. D-Spec shocks and struts are sold in sets of four. Each set includes a manual giving pointers on how to adjust the D-Spec as well as various suspension tuning tips.
Hotchkis Swaybars for 03-07 350Z & G35
LOTS INSTOCK!!!!!
Hotchkis Tuning Sport Sway bars improve your handling and reduce body roll.
Front: 1 3/8" (35MM) Hollow (Bar Weight 13.5lbs), 4 Position Adjustable, rate increase over stock +22%,+48%,+82%,+129%
Rear: 15/16"(24mm) Hollow (bar weight 5.5lbs),3 Position Adjustable, rate increase over stock +80%,+125%,+185%
KIT INCLUDES: Front and rear swaybars with collars on both bars, greasable bushings, and brackets.
FITMENT: 2003-2007 350Z & G35 Coupe & Sedan. Will not fit G35X.
Carbing Front Strut Bar for 03-07 Nissan 350Z
Front Strut Bar
Fully welded, constructed of A6063S aluminum, and includes a built in master cylinder brace for increased brake pedal feel.
Cusco OS Front Strut Bar for 03-07 Nissan 350Z
This is a lightweight aluminum bar with a rigid oval design and Cusco blue end plates.
Cusco Front Camber Arms for 03-07 350Z and G35 Coupe
Cusco 350z A Arms are designed to allow for 4-way adjustment of your front suspension, while utilizing a special rubber compound bushing to absorb some of the increased vibration and noise. These allow for a wider range of front camber adjustment for upgraded suspensions, wheels and tires, etc.
FITMENT: 2003-2007 350z and G35 Coupe.
ADJUSTMENT: +4mm, -4mm, -8mm, -12mm
Cusco Zero-2's shipped to 95616
