Still waiting for my UTEC to arrive...I know on the TurboXS website, they have base maps but none for the Vortech. Anyone have them available? or should I just have my tuener start from scratch?

 

You definitely need a base map to limp it to the tuner. Sharif sent me a base greddy map that worked with my stock pump/440 injectors. I limped it 130 miles on the interstate going about 75 and it ran fine. I can email you a few if youd like.

 

Well my setup is Vortech, 3.12 pulley, 440 injectors, Walbro.

 

Yeah, the map i could send you would be good to limp to a tuner. Keep it under 3k rpm and dont boost/ go more then 20-30% throttle. You will be able to tell how much throttle is too much cause the bypass will shut.

 

if you still need a map, pm me

 

I got a map...thanks! still waiting on the friggin UTEC from our forum sponsor. Ordered it on the 24th and still not here yet.

 

good luck on the mod!! try to stay under 3.5k on your way to your tuner, su#ks waiting for parts,

 

Will, who are you going to have tune the car?

 

It's going to be street tuned by a local guy here. After that i'll make a few pulls on the dyno to see how much I'm putting down.

 

make sure you get a good tune on it. We like you use 650cc for our FI setups.