Wheel Spacers
#2
I just recently asked the same thing and didn't get any replies. There is a thread on here where the guy used 25 mm wheel spacers all around on his 2007 G35 Sedan, but he had Infiniti M wheels on his. I think I'm going to get the same ones he got off Ebay, except in the 20mm variety. http://cgi.ebay.com/ebaymotors/_Car-...1%7C240%3A1318
#3
Definitely +25mm spacers at all 4 corners. Make sure they are hubcentric to Nissans/Infinitis 66.1 mm and have the proper thread pitch and spacing 5x114.3.
Here's ckp's car w/ +25mm spacers. The stock rear 18s are the same width and offset as the M45 19s (8.5" wide +50 offset) The stock front 18s are very close at 18x7.5 +45 offset. So, going w/ +25mm spacers at all 4 corners would give you a very similar flushness as ckp:
https://g35driver.com/forums/picture...lots-pics.html
Here's ckp's car w/ +25mm spacers. The stock rear 18s are the same width and offset as the M45 19s (8.5" wide +50 offset) The stock front 18s are very close at 18x7.5 +45 offset. So, going w/ +25mm spacers at all 4 corners would give you a very similar flushness as ckp:
https://g35driver.com/forums/picture...lots-pics.html
Thread
Thread Starter
Forum
Replies
Last Post