I'm the market to buy some wheel spacers soon but I would like some input on which size to get. I was thinking 10mm all around or 10mm up front and 15mm in the back. My wheels measure 20x8.5 +40 all around. When I measured from the side of the tire to fender it hit 15mm in the rear. Would I rub with a 15mm spacer?

FRONT:


REAR:

 

are your fenders rolled, im sure with a roll you wont rub with a 15mm esp with a 8.5

 

I havent rolled them but when I checked they were flat on the inside.

 

I would go with 15mm front and rear. But if you fenders are not rolled and you don't want to roll them. I would do the 10mm.

 

^ 2nd gens have rolled fenders from the factory.

The 15mm should fit fine since you're lowered (some camber). They'll sit pretty flush at 8.5 +25.

 

Thanks guys, I think I will end up getting 15 all around.