Aftermarket control arms
#1
#2
I recommend reusing your OE lower control arms and having the tired rubber bushings pressed out and replaced with Whiteline polyurethane parts which are stiffer and will last forever compared to buying rubber parts which will break again if you beat on them enough. Plus, it's even cheaper than buying new arms!
For the compression rod with the integrated balljoint either of those two brands you mentioned should be okay. Personally I went with the Mevotech Supreme compression rod mostly because of the blue boots, and it seems like a quality part. Just don't buy the cheapest one from any particular brand and you should be okay.
For the compression rod with the integrated balljoint either of those two brands you mentioned should be okay. Personally I went with the Mevotech Supreme compression rod mostly because of the blue boots, and it seems like a quality part. Just don't buy the cheapest one from any particular brand and you should be okay.
Last edited by cswlightning; 02-04-2019 at 12:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
anmblackG
Steering & Suspension
1
09-02-2012 01:18 AM
Pa1nandpleasure
Steering & Suspension
11
11-13-2011 06:16 PM
turbomaxima
Archived Sales
11
08-11-2006 10:55 AM