hard start rough idle p0345

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 25, 2017 | 08:37 AM
  #1  
turbobrewer's Avatar
Thread Starter
|
Registered User
Joined: Aug 2017
Posts: 2
Likes: 0
hard start rough idle p0345

2007 g35 sport 6mt completely stock, check engine slip and vdc light are one and card hard starts and run rough then runs normal then when normal operating temp it starts idle up and down between 1000 and 2000 rpm, car wont rev past 3500 rpm, I have replaced plugs, replaced vvt solenoid, changed oil 2 times, cleaned throttle bodies, checked for air leaks, check cats, swapped cam sensor from bank one to bank 2 and not change. any ideals.
 
Reply
Old Aug 26, 2017 | 01:13 PM
  #2  
cleric670's Avatar
BANNED!!!
Joined: May 2017
Posts: 14,837
Likes: 2,497
From: Washington State
Coupe 6MT Premium RAS
Premier Member

Check coil packs for damage/bulging on the epoxy resin (smooth glossy surface on teh top) or burning ANYWHERE on the coil down the spark plug shaft. Also get the starter checked as well as your battery. Have you done the idle relearn process lately?
 
Reply
Old Sep 12, 2017 | 01:43 PM
  #3  
turbobrewer's Avatar
Thread Starter
|
Registered User
Joined: Aug 2017
Posts: 2
Likes: 0
yes

Originally Posted by cleric670@gmail
Check coil packs for damage/bulging on the epoxy resin (smooth glossy surface on teh top) or burning ANYWHERE on the coil down the spark plug shaft. Also get the starter checked as well as your battery. Have you done the idle relearn process lately?
coil packs look good, I have tried ecu reset all the relearns but I'm still getting cam sensor code and can't get rid of slip and vdc light
 
Reply



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:13 AM.