P0300 code

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Apr 10, 2024 | 07:46 PM
  #1  
jaydice's Avatar
Thread Starter
|
Registered User
Joined: Aug 2023
Posts: 13
Likes: 3
Vq35HR
P0300 code

Car has multi misfire ( p0300 )

MY SYMPTOMS
Car misfires only low RPM (800-1.2k)
When i give the car light throttle to those rpm^ the car chokes and almost dies out, but anything higher then those rpms the car runs like a champ.
Also my A/F ratios are way off, and im also smelling gas.
PARTS IVE REPLACED
-o2 sensors -denso
-injectors -hitachi
-pcv valve
-fuel rail
-sparks - ngk iridium
-coils -hitachi
-ive smoked tested the car … nothing
 
Reply
Old Apr 13, 2024 | 10:43 AM
  #2  
cleric670's Avatar
BANNED!!!
Joined: May 2017
Posts: 14,837
Likes: 2,497
From: Washington State
Coupe 6MT Premium RAS
Premier Member

Did this just happen suddenly or did it start misfiring after you did some repair/upgrade/work on the car?
 
Reply
Old Apr 13, 2024 | 10:57 AM
  #3  
jaydice's Avatar
Thread Starter
|
Registered User
Joined: Aug 2023
Posts: 13
Likes: 3
Vq35HR
Originally Posted by cleric670
Did this just happen suddenly or did it start misfiring after you did some repair/upgrade/work on the car?

Started to do it after changing water pump , gally gasket, head gasket . But i only changed driver side head gasket. My fuel trims are way off on pass side though and no work was done on bank 1
 
Reply
Old Apr 13, 2024 | 10:59 AM
  #4  
jaydice's Avatar
Thread Starter
|
Registered User
Joined: Aug 2023
Posts: 13
Likes: 3
Vq35HR
Originally Posted by cleric670
Did this just happen suddenly or did it start misfiring after you did some repair/upgrade/work on the car?

Also the car was sitting for about 5 months , with a little less then 1/4 of gas. So i filled it with 93 and added some seafoam cleaner.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HyLowz
G35 Coupe V35 2003 - 07
5
May 13, 2023 11:32 PM
Kennycaine
G35 Coupe V35 2003 - 07
2
Jul 23, 2021 09:08 AM
willspencer04
G35 Coupe V35 2003 - 07
8
Aug 5, 2020 10:40 AM
cfauvel
Engine, Drivetrain & Forced-Induction
13
Oct 31, 2016 09:14 AM
jim9
General Tech Questions
6
Sep 14, 2012 02:27 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:01 AM.