Slappin some Berk HFC's in at Anthem if anyone around
 

Just got them in the mail from ART. Excited to install. Not sure if I need to come in from top or if that is just for 07 or what? Going to jack car up, take plastic off, hose with some nut buster, and figure it out. If anyone lives up this way and want to help a brother out, PM Me. Thanks.

Im not sure for the G but the Z you come from top and from under. Ask Artie(Trijicon), Ninous(Nino) or even Sirboostalot(John).

Installing HFC?

I'm not really sure what you meant by your post but its a pretty easy install... Just need some muscle.

Text me:

480-326-2745

What plastic are you talking about removing? Can you rephrase your post?

I assumed there would be some plastic crap from fender wells or oil thing in the way but there wasn't. I got them installed. Took me long time. The stock bolts on the cat are attached, so I had to take off some hangers and stuff from the Borla, and use a crow bar to seperate the exhaust from the cat so I could drop the stock cat down.

Installed the new Berk HFC's, Had the GF tighten the bolts from engine compartment while I held the berk bolt in place. Then I went up top and cranked it down.

It sounds good, feels like more low end power for sure.

While I was at it, I did the mod to shorten the clutch engagement: https://g35driver.com/forums/engine-...al-remedy.html

Thanks for everyone's insight on this.