Does anyone know if Iforged Aeros in 19x8 (+18) and 19x10 (+29) will fit on a G35 coupe with brembos? Please reply. Thanks.

BTW, wheels came off of a 350z non-brembo.



<P ID="edit"><FONT class="small"><EM>Edited by ICYG35C on 12/01/03 07:38 PM.</EM></FONT></P>

 

it should fit since the 350z and the coupe uses the same offsets. If you have a 6mt, they won't fit, due to the brembos.


2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79

 

On the 6mt they wont fit, but what would I have to do to get them to fit?

Sorry about the questions, I'm just inexperienced in this stuff...

 

Its basically to find the proper offset (unless teh spokes dip in to the point where it will not fit in front of the caliper without scrapping). The stock is 8'' width with a 30 offset, so you basically have to calculate out what would fit based on how flush you want it to the edge of the fender and the total with of the wheel.

 

wheel spacers, but that will affect the offset.


2003 G35 Coupe 6mt Diamond Graphite
1992 Jeep Cherokee Blk 5.5 RE lift /w 33s
AIM= bkchang79

 

I just ordered 19" EVO's from IForged, I was told that the offsets of the wheels they made are +18 / +30

I drive a 6mt and was assured these would fit

 

Hmm, +18/+30 is essentially the same as me. I have the aeros though... would that make a difference? Also, are your 19x8 front and 19x10 rears?
Please reply. Thanks.

 

I'm sure his are and yes, the offsets would be the same for both wheels.

Edretti
2003 Infiniti G35 Coupe 6mt Loaded Brillant Silver
http://www.cardomain.com/id/edretti