Anyone have success with 295-30-20 on the rear of a 03' on Coupe? Rubbing Issues, my off set is +22? Thoughts?

 

What is your wheel width, camber settings, drop, and did you roll the rear fenders? If they are 10.5+22, then you will likely need to roll your fenders to prevent rubbing. Most people with 285's in the rear need to roll to prevent rubbing in that offset and width

 

Wheel width is 10.5 and I have the eibach kit which has maybe a 1 inch drop if that on the rear, would shaving a couple mm on the offset to help any?

 

Instead of shaving a few mm off the wheel, shave a few mm of the quarter panels and you should be good to go. Or a better option would be to roll them

 

I wouldn't mind rolling them, but don't know of a reputable place to go in L.A. area, anyone have a suggestion (don't want to do the DIY out of the risk of paint chipping, etc.)

 

PM Ahero4eternity, he should know of some places since he's in socal.

 

Cool, thx for the help...