Hunt for unique rims
Originally Posted by Celestak
the wheel is called the mahora it's 1pc and it's casted not forged according to wald's site here's pictures of the different faces and the offset/sized available.......
You can thank me later....... Heeheee
You can thank me later....... Heeheee
I like that.
an Update.
This is what I'm looking for.
See the concavity.
That what I want.
Not necessary same design but the concavity.
I actually would not mind the design as well
This is what I'm looking for.
See the concavity.
That what I want.
Not necessary same design but the concavity.
I actually would not mind the design as well
Those AME wheels were already posted in the early pages of this thread, where you turned it down. You've already seen all the options, guy. Think it over and stop bumping this thread...maybe do some thorough digging around on your own, too.
Registered User
Joined: Oct 2007
Posts: 5
Likes: 0
From: Vancouver, BC, Canada
Originally Posted by Deezflip
+10000...many people mistaken offsets as a size of lips, concavity, or even brake clearance.
check out my etch-n-sketch, same amount of concavity face, different offsets. It's really that unknown spacing shown on the drawing to the right is what confuses people. No wheel manutfacturer gives or even considers this measurement.
check out my etch-n-sketch, same amount of concavity face, different offsets. It's really that unknown spacing shown on the drawing to the right is what confuses people. No wheel manutfacturer gives or even considers this measurement.
i was looking at 18x8.5 +38 (mid taper), 18x8.5 +32 (mid taper), and 18x9.5 +38 (deep taper). i was wondering to myself... how is 18x8.5 +32 mid taper if the offset is lower than the 18x9.5 +38 (deep taper)? your explanation makes sense in this case as it doesn't always tie hand in hand with the offset as the face is independent on how one wants it to look.
now, another question, does the width of the wheel play into affect how concave a wheel is? all the 9.5" width ones were deep taper and the 8.5" were mid taper.
there's no correlation. its manufacturer specific. just by the image above. They can make the narrower rims just as concave by reducing the depth of the face.
you'd have to look at the rims you want to determine if any of that plays a role in how concave it is.
you'd have to look at the rims you want to determine if any of that plays a role in how concave it is.