Question about 19's for '03 Sedan
#1
#4
The tires are already mounted on the wheels, they were on 350z. I'm trying to find out what the offset is. They were put on a G Sedan for a photo shoot, but I don't know if they drove the car at all while the wheels were on.
Showing my ignorance here, but do I dare ask how difficult it is to have the fenders rolled?
If this works, I will post pictures.
Thanks for your assistance to my questions.
Showing my ignorance here, but do I dare ask how difficult it is to have the fenders rolled?
If this works, I will post pictures.
Thanks for your assistance to my questions.
#5
You have a few issues. First you're putting 11.2" of rubber on a 9" wide wheel. Not a huge problem for a 350Z or G coupe but I"M GUESSING you'll need at least a +38 or higher offset WITH a fender roll to get that under your sedan and even then you MIGHT need - camber.
It's all about the offset, so what is it?
It's all about the offset, so what is it?
#7
Trending Topics
#10
#15
Registered User
iTrader: (1)
Join Date: Jun 2008
Location: Seattle, WA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
If they stick out an inch at the top of the fender you should go with something else for sure. Rolling the fenders will only move the lip on the inside of the wheel well up against the inside of the fender, if they are in fact sticking out at the top past the fender a roll will not change your situation.
Last edited by O-G35; 06-27-2008 at 05:50 PM. Reason: more info.