sup guys..
just got my 1st set of wheels today!!!

WOOHOOOO

they are Axis Penta...20x9.5 n 20x10

now i need tires....
wht size should i get???

i've seen around...normally ppl get
245/30 n 275/30 right???

planning to get falken 452....

these size good for my ride??


im running on stock suspensions right now...
gonna go Z's Stech (.7F & .6R) or Z's Rs-R Ti2000 (.6F & .6R)

thanks for yall help

 

don't have 20's, but those sound like the right sizes.

I would suggest you go with the RS*R Ti2000 for the Z which will actually lower your G about 1.1F and 1.1R. excellent performance and still keeps ride comfortable. I have these springs after replacing my Z H-Techs so I am biased.

 

those are the correct tire sizes, you could go with 255/30/20 and 285/30/20 also

 

nice nice thanks for the reply...

 

anyone tried
35 instead of 30 tires?

 

bump?

 

35 instead of 30 might make it more than 2% bigger than OEM wheel diameter so it would throw off the speedo and/or vdc

 

so go with 30???
i needa get some tires sooon....

my rims are dusting...lol

 

35 series are too big.. stick with the 30 series.. they're closer to the stock diameters

 

I would run 255's and 275's. 245 on a 9.5 will be quite a bit more stretch than the 275's in the rear.

 

actually they are 20x9s

So i should go

255/30 n 275/30??

 

bump/??

 

Either one will work fine. 245/30 or 255/30.

 

does 235/30/20 front work???
or is it toooo strech?

 

LOL just buy the darn tires so you can throw the dubs on your whip..

245/30/20 255/30/20 front
275/30/20 285/30/20 rear

The difference is too small to argue over. Stay within those sizes above and go enjoy the wheels.

Also 350z S techs will lower your G an additional .5 inches to the drop you stated.