ANOTHER Wheel Offset Question SF Winnings
triple8sol is absolutely right, it will not look very good
but yes it should fit fine. if you wanna it to look as good as it can, then a 15-20mm spacer will be needed
if i were you i would throw a 5mm on the new rear also
but yes it should fit fine. if you wanna it to look as good as it can, then a 15-20mm spacer will be needed
if i were you i would throw a 5mm on the new rear also
Actually, a 19x9.5+29 will not clear brembos in the front without a spacer according to the Volk spec sheet http://rayswheels.co.jp/cgi-bin/cgi2...?modelName=SFW
You need a wheel with an "INSET A" front disk, which has 10mm of additional clearance. How big of a spacer you actually need to clear your brembos is unknown, you will just have to test fit them for clearance
You need a wheel with an "INSET A" front disk, which has 10mm of additional clearance. How big of a spacer you actually need to clear your brembos is unknown, you will just have to test fit them for clearance
Joined: Mar 2006
Posts: 244
Likes: 1
From: Ontario Canada
Actually, a 19x9.5+29 will not clear brembos in the front without a spacer according to the Volk spec sheet http://rayswheels.co.jp/cgi-bin/cgi2...?modelName=SFW
You need a wheel with an "INSET A" front disk, which has 10mm of additional clearance. How big of a spacer you actually need to clear your brembos is unknown, you will just have to test fit them for clearance
You need a wheel with an "INSET A" front disk, which has 10mm of additional clearance. How big of a spacer you actually need to clear your brembos is unknown, you will just have to test fit them for clearance
Have you tried that size without a spacer? Rays spec sheet says it won't fit
Thread
Thread Starter
Forum
Replies
Last Post
911Turbo
19 Inch
10
Aug 24, 2016 08:31 AM
