Would these clear the inner struts?

I'm thinking not unless i get a 10mm spacer to be the least.

current tires on it are 235/40/18 and 265/35/18, which i think would require me to roll fenders to aleast fit these.

I like these wheels but i dont think these would work. Just thought i confirm with you guys first.

 

i would run 18x8.5 with 245 all around but that's just me.

 

I'm looking at a set of used wheels so picking and choosing my offset and width is out of the question.... I agree i rather go with a 8.5 width and a 30-35 offset but if that was the case i wouldn't of posted this and would of bought the set.

 

Interested to see the wheels you are referring to.

 

I think they would 'work', but I wouldn't recommend them. The difference in tire size might throw somethings off.

 

turtle, I am running 8.5 x 18 by 42mm offset with no problem so you should be okay with 9 x 18 x 40mm offset.

 

Don't forget his tire sizes. Hes going to have a staggered rolling diameter and a staggered width (not as big a deal)

 

Well i'm going to go back to a non-staggered once the tires wear down. I'm just stating whats on the car now and also looking for an ideal tire size to go with. 235/40/18 seems like a good size all around.

 

They should clear the struts fine, front and rear. Whether or not it rubs will determine how much of a drop you have. But i doubt it will rub either way. When you replace all the tires, go with a 245/40 or 255/40/18 all around.
-GP-

 

i'll be dropped on 350z revised suspension on a X, so roughly 1.5 all around.

the wheels are just an JDM old school OZ wheel,

 

I'm pretty sure you will clear the inside ok with those. A 10mm spacer will make the front rub on the outside.

 

Those should fit w/no problems. For reference I have 18x9.5 +38 wheels on 245/40/18 tires. The only thing added was a 3mm slip spacer for suspension clearance on the inside.

Pic

 

Bowzer, you are making me want 18's.

 

bowzer, 3mm all around or just fronts?

well for me to be at the same as you, i would need a 5mm right?

 

You sure you will be able to use a 350z suspension on your AWD?