Ichiba V1 or V2 spacers
Guest
Posts: n/a
Ichiba V1 or V2 spacers
so i currently have Ichiba 10mm v1 spacers on my front tires. but was wondering if there is a performance difference between the v1 and v2 Inchiba spacers? or is it just based on personal preference and the v2s being easier to install? thanks in advance for the input!
No difference in spacers, only if it is hubcentric or not.
V1 spacer is for 5mm and 10mm which you usually don't need to change the studs.
V2 is for 15mm or bigger which already has the studs in them so all you have to do is place it on the hub of the car tighten it down and you can bolt on the wheel without having to replace the entire stud to work with the spacer which is a lot easier IMHO.
Hope that helps.
V1 spacer is for 5mm and 10mm which you usually don't need to change the studs.
V2 is for 15mm or bigger which already has the studs in them so all you have to do is place it on the hub of the car tighten it down and you can bolt on the wheel without having to replace the entire stud to work with the spacer which is a lot easier IMHO.
Hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post
Terry_G35
G35 Coupe V35 2003 - 07
3
Sep 10, 2015 08:17 PM
Boston
Archived Sales
14
Nov 4, 2008 07:39 PM
