IForged from Coupe fit the Sedan?
Thread Starter
|
Registered User
Joined: Feb 2004
Posts: 267
Likes: 0
From: Ft.Lauderdale, FL
IForged from Coupe fit the Sedan?
Just curious.... I am looking into trading in my 6MT coupe for a 5AT Sedan (baby on the way). If I do this, are the staggered IForged 20s (20x10/20x8.5) going to tuck under the fenders of the Sedan?
THANKS!
THANKS!
Registered User
Joined: Apr 2004
Posts: 1,567
Likes: 6
From: Temecula, California
Re: IForged from Coupe fit the Sedan?
Not sure on the offsets from the coupe but the sedan's are 40-45 offset by OEM. The 20X8.5 will fit in the front granted it meets the offsets, the 20X10 on the other hand, you may have to roll your fender. I do not know anyone with a 10" in the back, i know of 9" in the back. Hopefully someone has that setup here somewhere.
03.5 BS, 6MT, premium, 19" Kaizer wheels, Skyline badges, PIAA HID upgrade, Racing pedals, clear lenses, 35% tint, 7-wire ground, TEIN basics, side mirror blinkers
03.5 BS, 6MT, premium, 19" Kaizer wheels, Skyline badges, PIAA HID upgrade, Racing pedals, clear lenses, 35% tint, 7-wire ground, TEIN basics, side mirror blinkers
Registered User
Joined: Dec 2003
Posts: 1,915
Likes: 4
From: O.C.
Re: IForged from Coupe fit the Sedan?
True!! Depending on the Offsets...FYI I am running 19x8 front + 38 and 19X9 rear + 45.. Hope that helps..
Peace
reggie
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
Peace
reggie
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
Registered User
Joined: Sep 2003
Posts: 46
Likes: 0
Re: IForged from Coupe fit the Sedan?
Not sure if the rims will fit or not, but on another note, I have two young children (ages 4 and 2) in my coupe and they fit just fine. No need to trade in if you don't want to...
Re: IForged from Coupe fit the Sedan?
NO WAY!
Typical offset for the 8.5 on the coupe is around 24-26, the sedan needs at least a 38.
Typical rear offset of the coupe on the 10 is 26-31, iForged will use a 31 if you do not specify otherwise, you would need around a 55 for a 10" rear for the sedan.
How do I know? I had iForged wheels on my Z (same offsets as coupe). Your car will look like a bug-eyed fool.
2004 6MT Sedan-- Diamond Graphite
Stoptech 13" Brake kit-- Nismo S-tune Suspension
2003 Nissan 350Z--SOLD
Typical offset for the 8.5 on the coupe is around 24-26, the sedan needs at least a 38.
Typical rear offset of the coupe on the 10 is 26-31, iForged will use a 31 if you do not specify otherwise, you would need around a 55 for a 10" rear for the sedan.
How do I know? I had iForged wheels on my Z (same offsets as coupe). Your car will look like a bug-eyed fool.
2004 6MT Sedan-- Diamond Graphite
Stoptech 13" Brake kit-- Nismo S-tune Suspension
2003 Nissan 350Z--SOLD
Thread Starter
|
Registered User
Joined: Feb 2004
Posts: 267
Likes: 0
From: Ft.Lauderdale, FL
Re: IForged from Coupe fit the Sedan?
rob575... this is our first child, we were kinda concerned with the space as far as accessories (stroller, bags, etc) when traveling around with Jr.... Plus my wife doesn't have the best of backs, I figured it was easier to get a baby out of a sedan than leaning over to get one out of a coupe....but i'll keep your idea in mind....thank you
Registered User
Joined: Dec 2003
Posts: 1,915
Likes: 4
From: O.C.
Re: IForged from Coupe fit the Sedan?
That's why I'm driving a SEDAN [img]/w3timages/icons/smile.gif[/img]
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
6MT Ivory/Willow>>Nismo OEM Kit>>Premium Package>>XM
"Is simplicity best or simply the easiest"
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM