G35 Vs-xx offset question.
#1
G35 Vs-xx offset question.
ok I'm still trying to learn offset so I had a question for the rims I wanted to get for My g coupe. I got a 03 G35/brembo about to be drop on Tein-s tech and I wanted 19's for it with a nice offset with the works vs-xx rims
what would my fellow g35 buddy recommend? I wanted
what would be a good offset for the aggressive look?
also what tire size would be recommended?
what would my fellow g35 buddy recommend? I wanted
what would be a good offset for the aggressive look?
also what tire size would be recommended?
![JAMIN](https://g35driver.com/forums/images/smilies/jammin.gif)
#2
Registered User
iTrader: (10)
#3
#4
SWEET 2 threads on the same thing!
if you want to know offsets, anyone who knows anything about offsets will tell you that it also depends on the widths. If you are pretty low you will need a different combination of width and offsets to be flush
For being pretty low on a 9.5 (front) I found you need about an offset of 10 or less and
10.5 in the rear you can do like a 15 or so and it keeps going up from there
if you want to know offsets, anyone who knows anything about offsets will tell you that it also depends on the widths. If you are pretty low you will need a different combination of width and offsets to be flush
For being pretty low on a 9.5 (front) I found you need about an offset of 10 or less and
10.5 in the rear you can do like a 15 or so and it keeps going up from there
#5
SWEET 2 threads on the same thing!
if you want to know offsets, anyone who knows anything about offsets will tell you that it also depends on the widths. If you are pretty low you will need a different combination of width and offsets to be flush
For being pretty low on a 9.5 (front) I found you need about an offset of 10 or less and
10.5 in the rear you can do like a 15 or so and it keeps going up from there
if you want to know offsets, anyone who knows anything about offsets will tell you that it also depends on the widths. If you are pretty low you will need a different combination of width and offsets to be flush
For being pretty low on a 9.5 (front) I found you need about an offset of 10 or less and
10.5 in the rear you can do like a 15 or so and it keeps going up from there
Thread
Thread Starter
Forum
Replies
Last Post
yellowshirt
Wheels & Tires CDN
3
04-08-2018 06:09 PM
laksjd84
Exterior - Body Parts
1
07-24-2015 05:12 PM