Newbie spacer question
15 front
20 rear
my fenders arent rolled
Im going more aggressive so im umping to 20f/25r and that will require me to roll my fenders.
but remeber it will still be sunken in but it wont be bad at all. Im pretty happy right now with my setup but as always, I want more.
with your oem tire size tires will be sunken in way more untill you go larger tires.
go with 245/35f 255/40r when ready for larger tire setup.
20 rear
my fenders arent rolled
Im going more aggressive so im umping to 20f/25r and that will require me to roll my fenders.
but remeber it will still be sunken in but it wont be bad at all. Im pretty happy right now with my setup but as always, I want more.
with your oem tire size tires will be sunken in way more untill you go larger tires.
go with 245/35f 255/40r when ready for larger tire setup.
Joined: Sep 2008
Posts: 117
Likes: 2
From: bergen couny nj
lights out, if i go 245f and 255r, can i go for the 15/20 set up and not have to roll the fenders? this is on stock height until the cash comes in to lower the car. like you i want that aggressive stock look also, (lol the fact that wheels and tires are crazy expensive doen't help either)
lights out, if i go 245f and 255r, can i go for the 15/20 set up and not have to roll the fenders? this is on stock height until the cash comes in to lower the car. like you i want that aggressive stock look also, (lol the fact that wheels and tires are crazy expensive doen't help either)
MY falken 452's costed me about 650 or so for all four tires.
Joined: Sep 2008
Posts: 117
Likes: 2
From: bergen couny nj
don't mind the crazy quesitions, im still new to the forum trying to figure out how to navigate. i clicked on your link but im not sure where to find the photos?
Joined: Sep 2008
Posts: 117
Likes: 2
From: bergen couny nj
hey guys sorry to revive this thread,, ive finally decided on some tein z tech springs, i just got a free 245/40/19 s.drive from the dealer 
so im gonna keep the 245 in the rear and the 225 in the front for a while, the z techs drop it a lil over an inch so if i get 20mm all around will i have a rubbing issue? is that the widest i could go without rolling ??
so im gonna keep the 245 in the rear and the 225 in the front for a while, the z techs drop it a lil over an inch so if i get 20mm all around will i have a rubbing issue? is that the widest i could go without rolling ??
you wont rub on oem size tire.
my tires are wider front and back and I have larger spacer in the rear and i still dont rub.
suggest 25 f/r or 20/25
and get wider tires when oems ware out
my tires are wider front and back and I have larger spacer in the rear and i still dont rub.
suggest 25 f/r or 20/25
and get wider tires when oems ware out
Joined: Sep 2008
Posts: 117
Likes: 2
From: bergen couny nj
thats exactly what i needed to hear... i want them to sit as flush as possible.. you have tein springs or coils on your ride? hows the ride quality
thansk man
thansk man
Joined: Sep 2008
Posts: 117
Likes: 2
From: bergen couny nj
did you have to modify anything with getting the z spec springs or where they a direct replacement? any camber kit??
what springs are ya plannin on gettin?
what springs are ya plannin on gettin?
Joined: Sep 2008
Posts: 117
Likes: 2
From: bergen couny nj
thanks so much for your help, im sorry for askin so many questions ijust wanna make sure i get everything right the first time im on a budget like most people lol. what kind of camber kit did you get do you mind if i ask how much did it run ya?
I went with Ichiba front camber kit.
price was 285 shipped new.
anything more than an inch Ichiba kit wouldnt be able to bring back to spec.
I dont mind helping others out.. If I would have known what I know now, I would have done it right the first time also.
price was 285 shipped new.
anything more than an inch Ichiba kit wouldnt be able to bring back to spec.
I dont mind helping others out.. If I would have known what I know now, I would have done it right the first time also.
