coupe suspension...
coupe suspension...
has anyone installed the coupe suspension? i was looking at the eibach suspension, but i heard they had problems. I am looking for springs that will lower my car a little and i want to feel the difference when i turn. Any suggestions?
KhaL
Eyyyy....u tryin to race or what?!
KhaL
Eyyyy....u tryin to race or what?!
Re: coupe suspension...
Well, their is one member that I know of that is about to install the oem G coupe suspension on his car. It will lower the sedan 1". It should feel a little bit stiffer then the oem sedan sport suspension. One key factor is that your a bit lower and you didn't use progressive springs to do it.
To really kick the car up a notch, you'd want the 04 Z suspension. You could install Koni shocks on oem Z/coupe springs or the Tokico D-spec shocks about to come out.
350Z RSR springs would also be a option, though not ever sedan owner is willing to drop 1.6" to run them, they are excellent performance spring. I'd be inclined to run them on coupe shocks at the very least.
"All that's necessary for the forces of evil to win in the world is for enough good men to do nothing.”
Edmund Burke
G35 6mt
To really kick the car up a notch, you'd want the 04 Z suspension. You could install Koni shocks on oem Z/coupe springs or the Tokico D-spec shocks about to come out.
350Z RSR springs would also be a option, though not ever sedan owner is willing to drop 1.6" to run them, they are excellent performance spring. I'd be inclined to run them on coupe shocks at the very least.
"All that's necessary for the forces of evil to win in the world is for enough good men to do nothing.”
Edmund Burke
G35 6mt
Re: coupe suspension...
Have the coupe suspension ready to install on my sedan, will get to it in the next week or so and let you know. Hey Gsedan35...what would be the next move if I wanted up another notch from the coupe set up, simply the shocks from a 04Z combined with coupe springs..
Gboy
Black Sedan
ZTube
K&N
Gboy
Black Sedan
ZTube
K&N
Thread
Thread Starter
Forum
Replies
Last Post
djreinx
Engine - Electrical
3
Dec 10, 2015 01:48 AM



