Sorry to post such a newb question but after a few hours of searching I couldn't find any answers. So I'm planning on getting a set of the Five Axis wheels in 19x9.5 +25 and 19x10.5 +22 with 245/35 and 275/35s Falken 452s I'm still rockin the stock suspension until I can afford to do it right. Now on the stock set up is this going to rub or will I need a roll? I'll eventually get coilovers and drop it proper but probably not for a while. So whats the general consensus will this setup rub on a stock setup?

 

no it wont

 

yeah youll have plenty of clearance...

 

thanks for the input guys

 

I'm still indecisive on the rims I'm also considering a set of 18x9.5 and 10.5 +15 for both with 245/40 and 275/40 I know it should fit but what about these sizes and VDC its 3.7% difference compaired to the stock sizes w/ 2.7% difference would this mess up the VDC?

 

The five axis setup will fit ok. You should try to stay under +/-3% difference from the stock overall diameter to keep the VDC working ok.