im my other G, i scrape in my drive way. pluss i'll be runnning 40 or 45 series tires, so it will fill up the wheel well

 

for anyone with questions for the 526s... here are mine.
Front: 20x9 +15mm offset with 245 hankook v12s
Rear: 20x11 +35mm offset with 285 hankook v12s (shoulda went 275)

i have my rear fenders rolled and pulled. I have one fender with a bit of rust so it couldnt be pulled as much so i rub a bit... thats why i say i shoulda gone 275s in the rear. The side you are seeing i dont rub unless i whack a massive crater
and im also on greddy coilovers and at about 95% low. dont know the exact specs. and i have a little negative camber but i dont know exact alignement spec either. If anyone needs them tho i could make a call. hope this helps some ppl. More pics to come next weekend. Love these wheels!!!!

 

can we get a pic from the back?

 

You got the 20x11s with a +35mm offset? If yes, can I ask where you purchased them from. I was under the impression the 20X11's only came in +15mm

 

yes they are 35mm offset and i got them right here from topspeedautosports

and i have no good pics from the back... ill take some later and post them up

 

UPPS maybe you are confuse or something but if they where 35 offset your wheel wouldn't be that flat in the middle, more like a concave look, maybe you thought about it but those are 15 offset, they haven't make 35 offset in those 20x11....i check everywhere and those are only made 20x11 +15 offset....if they where 35 offset it will probably hit the inner part of the fender (shock) because is not enough space that's why most of us run stretch tires...

 

whoops... my bad guys i just rechecked my order. my offsets were backwards. 20x9 +35mm in the front and 20x11 +15 in the back. you are right they did not make 35mm offset for the 20x11s sorry for the confusion.

and yea you need to run a stretch in the rear. not crazy tho, unless thats what you are into. Like i said im running 285s in the back and on the side that the fender is rolled and pulled as it should be... i dont rub. Unless your looking for a crazy stretch i wouldnt go less then 275s.

 

yeah i will run 275 on it, i seen people doing 255 and a 10mm spacer but from the back looks like a low rider (mexican style), not that mean look i`m looking for....

 

are you lowered? bc i dont have spacers and im damn close to my fender as is haha and they are pulled. and yeah i see 255s alot, it gives you a bit more clearance but thats a good stretch and im from north Jersey... winters are not kind to the roads and that tire on that wide of rim could end up being a headache.

 

nope my plans are teins s-tech with tokicos hp i like the 275 because it just look right from the back not to wide not to skinny ....i don't plan putting spacers neither i think i just need to roll the fenders and ill be good....is good to see different design and specs from other members before you decide what to buy....at least that's my case by the way you car looks just perfect to me, i just worry about the clearance that's why i will run 275.....

 

New shipment in today! 20x9 +15 and 20x11 +15 Chromium Black. Get in on this before they get sold out!!!

 

Howmuch camber are you running? Why did you decide to go with 35 offset in the front?

 

im not sure. the guy who did my alignment didnt give the specs. if i had to guess id say -3 but thats just my guess. and i went with a 35 bc i went to a shop near me to order them like 4 months ago (to see if i could get them faster) and the guy said +15mm offset would have trouble fitting in the front. So i went with 35 knowing it would fit and if i wanted it more flush... well that is what spacers are for lol. honestly with how low i am, if i got 15 i probably would have to of had my front fenders rolled and pulled too. im happy with how it came out.

also here are some more pics from the back:

 

looks perfect to me!!!!!

 

by the way which tire (sidewall size) are you using front and rear ? is it 35 rear and 30 front ? 285/35/20 and 245/30/20?