Who Has VarrsToen Wheels on their Cars?
They are
19x10 +15
19x11 +15
I am on s techs, but for some reason the rears sit so much higher than the fronts. I heard about the springmount mod and want to give this a shot. Has anyone done this?
19x10 +15
19x11 +15
I am on s techs, but for some reason the rears sit so much higher than the fronts. I heard about the springmount mod and want to give this a shot. Has anyone done this?
Pics!!!
Thats a huge gap for s-techs, it looks stock. You might want to check if the spring was installed correctly. The mount mod won't take care of a gap that big.
Last edited by Polishthrust; Nov 30, 2012 at 07:34 PM.
For my OEM 19's and winter tires it sits way lower for some readon. Any ideas?
Figured I would contribute a few pics.
ES 1.1.2
19x9.5 +12
19x10.5 +12
I put 20mm spacers on just to see what it would look like. I obviously encountered some rubbing issues.
Without the spacers
Took the spacers off, got the wheel faces painted Anthracite w/ gloss clear coat:
ES 1.1.2
19x9.5 +12
19x10.5 +12
I put 20mm spacers on just to see what it would look like. I obviously encountered some rubbing issues.
Without the spacers
Took the spacers off, got the wheel faces painted Anthracite w/ gloss clear coat:
current setup constists of:
rear> ES 1.1.2 19x11 +0 (Gloss black/gold rivets)
Goodyear F1 supercar 325/30zr19
front> ES 1.1.2 19x9.5 +0 (Gloss black/gold rivets)
Goodyear F1 supercar 285/35zr19
haven't done the fender work yet, but this is where I am with my Varrstoens.
rear> ES 1.1.2 19x11 +0 (Gloss black/gold rivets)
Goodyear F1 supercar 325/30zr19
front> ES 1.1.2 19x9.5 +0 (Gloss black/gold rivets)
Goodyear F1 supercar 285/35zr19
haven't done the fender work yet, but this is where I am with my Varrstoens.
You guys should make some 19" wheels that can fit sedans without excessive poke/camber/tire stretch....you're missing out on not only G sedans but GS, TL, etc...19x8.5 low to mid 30s offset 19x9.5 mid to high 30s offset would be great..
Last edited by dominate; Dec 30, 2012 at 05:03 AM.
