How much would u sell them for?? Would u sell just the rims??

 

id rather sell them together as thats how i got them and then id just start over fresh..i paid 2500 for the wheels and tires and have only cleaned them up, polish, and test fit. my cars off the road for winter so they arent getting used till after winter. tires are nitto neo gen 245/35/19 front 70% and 275/35/19 back 65%-70% tread

 

Sounds good.. I will keep in touch..

 

also there are times over the winter i go to hunter mountain which i beleive would be towards your way if u ever wanted to meet up there to check em out i could bring them along.

 

also just curious what wheels are u running?

 

I'm running oem 19's.. I never heard of hunter mountain.. is it in Pennsylvania??

 

na still in ny..i live upstate ny about hour and a half west of albany..hunter is about an hour south of albany i beleive towards nyc way.

 

You know could just put a washer of each stud and install the wheel. This will give you an idea of what a 2mm spacer will look like.

 

Oic.. yeah I'm in south jersey right over the bridge from philly..

 

ya i am doing that just for an idea but id never drive with it like that...

 

ah ok..ic..

 

Grind the caliper, it's already scratched so grind it off and paint them.

 

its not really scrathed bad, nothing anyone would ever notice unless u were taking the caliper off and had it in ur hand..i didnt drive with the wheels..only spun the wheel one time by hand with the car jacked up and it just left a tiny black mark, not nearly enough to warrant grinding the brembo calipers down .....ive heard of people doing that though but would probably never do it just because the brakes are a pretty touchy thing to mess with as they stop the car, if i were to grind anything id just grind the paint off the back of the spokes on the wheels.

 

the 2mm spacers are on the way and the suspension parts to get it lowered so just gonna throw those on and get the car lowered and a little camber and see how i like it, might even pull the fenders a tiny bit if i need to

 

For future reference, I use 3mm universals from amazon. Haven't had any issues, but the kics look more promising.