Alright guys i need your help, i'm going to be getting some Stern Beast Wheels for the G, (bro's 1200 bucks ;can't go wrong, if they get chipped tose them in the gutter go buy another) ..anyways i need some help in offsets, The rims are going to be 20x8.5 in the front, and 20X9.5 in the rear, I was thinking +25 offset on both ends, but i don't want to be rubbing ( i also want the biggest possible lip, so i figure i might get a little more). I might lower the car if it looks like a boat, but not to sure till i see...Any suggestions would be nice...Also I'll be running 245/35/20 front and the back 275/35/20 (Trying to fill in the gap a little more)

I figure, that my S2 is fast enough so i don't need to race out this car,

Thanks everyone in advance.....

 

I know which stern wheels you're talking about, but I'm not sure if they come in different styles. I say that, because on my Work Meister S2R, I originally tried to order +25mm offset for all 4 rims. (Fronts being 8.5" and rears being 9.5")

Anyways, they told me that if I did that, my rear lips would be smaller than my fronts, because the 9.5" wheel had a different disc design than the 8.5" wheel. (I believe one was a deep dish, the other was a big disc). So they told me the recommended fitment for my car from Work, was F+25 R+20. So that's what I got, and they are great. Granted I don't have 20's, but that doesn't affect offsets.

I'm not sure if Stern wheels come in two different flavors (big disc/Big lip) like Work wheels, so you may be able to get +25 on all fours. Your best best is to ask the store. If they don't know, then you shouldn't be buying rims from them