Dropped with Tanabe GF210 for 350z. Love the drop... more than i thought... friends thought i got c/o's



Front


Rear






Gauge Install






Also just bought GREDDY SP2.. nice nice..

 

do you have a rear spoiler?
mind if you post rear shot? thx

 

I like that look. simple and clean.

 

Did you swap the sshocks out? How bout another level side shot!? Looks hot!

 

Nicely Done! Id like to see more pics and hear more stats too!

Whats the ride like? obv stiff, but is it ok?

What are the specs on the wheels? Tires?

That gauge pod is pretty cool too - whats its for? what mods is it monitoring? or is it just for show?

Overall, cool a$$ car man - keep up the Good WeerK

 

Daniel, i see with the money i gave you for the edfc you went and got the springs.


So you figured out how to tap into the ECU to plug in the A/F gauge.

Very nice, you gotta tell me how u were able to do it, you called me and i didnt know.

Very nice

 

The springs he went with are a bit stiffer then oem.

Tanabe GF210 Series 350Z
Spring rates in lbs 336/375
Stiffer then oem springs by F+7% R+10%
Transfers +3% roll stiffness to rear

I'll go out on a limb and say that at best ride quality will be simular to oem, bumps that would normally be felt will feel a bit more sharp. But the oem shocks don't have much leeway in regard to adding stiffness, sensation will be that you don't have quite enough rebound control that will show up more as speeds increase. Aftermarket shocks are a good idea even on oem springs, more so when you go stiffer. Since the springs will drop a Z 1"/1.2", they should drop a G coupe around 1.5"/1.7" , meaning aligning back to oem specs is not in the card's without aftermarket alighnment parts.

 

Very Nice

 

P.S. Like the way your BREMBO shows through the Wheelz

 

good execution of mods there...looking good...

 

nice drop and ride.

 

Cars looking good, clean and simple!!! How you like the sp2 so far?

 

The ride is significantly poorer than the OEM springs of course especially at high speeds on the freeway.. but its not too much to handle.

The Gauge is an A/F gauge that is just for show :P
Actually RASHMAN, i didnt hook it up to the A/F sensor yet. but i know how to do it now. it's just powered on by ignition for now.

The Wheels are 19" RO_JA Formula 7's. 19x8.5Front 19x10's Rear.

Thanks for lookin. :-D will post some more pics from different angles soon.

 

Nice man, I got the same rims but in silver. Their not on yet I still need tires. What kind of spacer did you go with for the front rims out of curiosity? Looks great!

 

nice