Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eibachs
#17
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
Thanks for the compliments guys. The wheels cost $2,200 and the caps $30 each. Tires are Dunlop SP9000's. 275/35/19's on the rear and 245/35/19's on the front. 8.5 and 9.5 Widths. Oh and tires were about $900 for all. Oh and I got the wheels from Joe at America's Tire in Carson California. He located these wheels for me in a day. He was great on Pricing and everything else!! If you buy from him tell him Tom sent you.
<P ID="edit"><FONT class="small"><EM>Edited by blk6pd on 06/16/03 07:55 PM.</EM></FONT></P>
<P ID="edit"><FONT class="small"><EM>Edited by blk6pd on 06/16/03 07:55 PM.</EM></FONT></P>
#18
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
what size are your tires bcoz i have 245 40/19's and i wanna get the eibach pro kit but it looks the same as stock height to me on your car..but on Wreck's car its very noticeable
hometown.aol.com/v35skylinepnoy
Sactown Cali
hometown.aol.com/v35skylinepnoy
Sactown Cali
#19
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
oh nevermind hahah i didnt kno there was a page 2 to this thread
hometown.aol.com/v35skylinepnoy
Sactown Cali
hometown.aol.com/v35skylinepnoy
Sactown Cali
#20
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
<blockquote><font class="small">In reply to:</font><hr>
Wreck's car its very noticeable
<hr></blockquote>
Blkspd height is perfect for me with his 19's. With my 20's the gap really filled up and looks dumped. A bit to low for my taste. I wish I could add a rubber or something like nascar and raise my car just 1/2 inch. To tell you the truth, Eibach says it lowers the front .8 and the rear 1.2 inch. I think it is the other way around.
G35C 6MT / E55
Wreck's car its very noticeable
<hr></blockquote>
Blkspd height is perfect for me with his 19's. With my 20's the gap really filled up and looks dumped. A bit to low for my taste. I wish I could add a rubber or something like nascar and raise my car just 1/2 inch. To tell you the truth, Eibach says it lowers the front .8 and the rear 1.2 inch. I think it is the other way around.
G35C 6MT / E55
#24
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
i liked that dumped look on ur ride coz it fills the wheel well and looks off da heezy..thats how i want mine to be..without messin up da the camber
hometown.aol.com/v35skylinepnoy
Sactown Cali
hometown.aol.com/v35skylinepnoy
Sactown Cali
#25
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
#26
#28
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
CALi - if you're looking into going lower than the Eibach's, Sprint offers a lowering spring set that lowers the car 1.75", which would be more than 1/2" lower than the Eibach's and might be the look you're going for - check out Ducatiguy's ride, he has them installed...
btw, I still wish you would have went fat out back on your ride...
btw, I still wish you would have went fat out back on your ride...
#29
Re: Volk GT-C's GunMetal 19's on BlK 6pd Cp w/Eiba
Sorry to bring this post back up but I wanted to ask a couple questions:
1) Would anybody mind photoshopping his car to DG? Or does anyone else on the forum have this setup on a DG coupe? I just want to know how the gunmetal finish will look with the DG...
2) Also, I was looking at the Rays Engineering website and noticed that they have a finish for the GT-C's called "Mercury silver" which looks darker than the normal "Spark" silver and lighter than the gunmetal - it actually might be the perfect finish for DG - the only problem is that I have never seen this in real life on a car - has anybody else?
72126-GTC-mercury.jpg
1) Would anybody mind photoshopping his car to DG? Or does anyone else on the forum have this setup on a DG coupe? I just want to know how the gunmetal finish will look with the DG...
2) Also, I was looking at the Rays Engineering website and noticed that they have a finish for the GT-C's called "Mercury silver" which looks darker than the normal "Spark" silver and lighter than the gunmetal - it actually might be the perfect finish for DG - the only problem is that I have never seen this in real life on a car - has anybody else?
72126-GTC-mercury.jpg
#30