G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   Wheels & Tires (https://g35driver.com/forums/wheels-tires-25/)
-   -   Got my Eibach's (https://g35driver.com/forums/wheels-tires/6077-got-my-eibachs.html)

myG35ZX Jun 19, 2003 04:01 PM

Got my Eibach's
 
I got the Eibachs from Stillen. Ordered them on the 13th and they arrived on the 19th. I will try to make time this weekend and install them.

Robert

G35 Coupe 5AT, DP, Tire and Wheel Pkg., Aluminum Pedals, Clear Corners, missing turbo

65241-Springs.jpg

medriver99 Jun 19, 2003 04:23 PM

Re: Got my Eibach's
 
Are you installing these yourself??
How hard is it ,are there special tools needed??
I usually work on my vette but I have not wrenched on this car yet.

Thanks
Mike


myG35ZX Jun 19, 2003 04:58 PM

Re: Got my Eibach's
 
Well, this will be my first wrenching on the G. However, I have extensive experience with off-road custom vehicles and this shouldn't be very difficult. The only tool I need is the spring compressor. I am trying to locate one to rent.

Robert

G35 Coupe 5AT, DP, Tire and Wheel Pkg., Aluminum Pedals, Clear Corners, missing turbo

wreck Jun 19, 2003 06:05 PM

Re: Got my Eibach's
 
It's not that hard. Spring compressor helps, impact wrench helps alot to unscrew the bolt on top of the shock. Also a long bar or bat is needed [img]/w3timages/icons/wink.gif[/img]

G35C 6MT / E55

MaXXXiMaNiaC Jun 20, 2003 05:55 PM

Re: Got my Eibach's
 
suspension is simple!
Spring compressors are a must, they can be rented from autozone for free...

Impact wrench would be nice, especially to undo the bottom bolts. Should be simple though, no rust..

Torque wrench would be nice to tighten back to factory spec, but most people think the tighter the better.

Just remember one thing guys, LOOSEN the middle bolt on the strut, DO NOT REMOVE IT until the whole assembly is off and the spring is compressed.


myG35ZX Jun 20, 2003 10:20 PM

Re: Got my Eibach's
 
How did raise the G up for the jack stands. I slid my jack under where the factory jack should go and I can't seem to get the jack stands to sit correctly. For the back, did you raise the G up and use the jack to lower the spring down - ie did not use the spring compressor. Also, my spring compressor is for struts, but it seems to work on the front well.

Thanks,
Robert

G35 Coupe 5AT, DP, Tire and Wheel Pkg., Aluminum Pedals, Clear Corners, missing turbo

dbngabesG35 Jun 22, 2003 02:39 AM

Re: Got my Eibach's
 
Can you keep the 18" wheels on with this kit, or do you have to go to 17s? I suspect the 18s are OK, the kit lowers the car only 1.1", but does anyone know for sure?

Also, does this prevent you from then being able to also add a body kit?


gdupg35 Jun 22, 2003 04:50 PM

Re: Got my Eibach's
 
You can fit 20's with the Eibach Pro Kit and still. It's the overall diameter (height) of the tires that matter. I have 245/35/20's on my sedan and they fit nicely with the Eibach drop.


gdupg35 Jun 22, 2003 04:50 PM

Re: Got my Eibach's
 
You can fit 20's with the Eibach Pro Kit and still clear them. It's the overall diameter (height) of the tires that matter. I have 245/35/20's on my sedan and they fit nicely with the Eibach drop.



All times are GMT -4. The time now is 10:51 AM.


© 2026 MH Sub I, LLC dba Internet Brands