![]() |
I think I'm regretting the Eibach Springs!!!
Hey folks, I just got back from the body shop, the Greddy/Kenstyle body kit is on (both authentic). No fitment problems at all!! It's getting painted tomorrow. I'm so happy...but....
This thing is sooooooooo low!!!!!! I have the Eibach springs and combined with the Greddy front bumper, this thing sits like 3" off the ground! I can't even clear the driveway getting out of the body shop!! What springs can I get that will lower the car only .5"?? I will trade someone for other springs that will only give me a .5" drop or I'll buy if someone has something laying around. I need them by next Thursday. Thanks guys and gals! ~C |
Try Tein H springs
|
You think that's low? I'm running 1.75" Sprints with Greddy front & sides and Kenstyle (replica) rear... I swapped out my 19" for 20" just for the raise...
|
350Z springs will drop you .5"
|
Eibach is not that low...unless you're running the Z version. There are much lower springs out there.
|
I had my tein basics set at stock height.
|
the prokit lowered the front and rear about 1.4" when I tried it out. im using the rear's right now, they look fantastic on the car. front, im running s-techs.
|
Do you know how to drive a dropped car? You have to go up and drown driveways at an angle...one tire at a time from left to right, or vice versa.
Also when you park, be mindful of those concrete blocks in front of parking spots..if you go too forward you'll scrape. |
I scrape those concrete things in the front of parking spaces stock
|
Originally Posted by Patentmat
I scrape those concrete things in the front of parking spaces stock
S. |
Originally Posted by Patentmat
I scrape those concrete things in the front of parking spaces stock
|
Originally Posted by Chris
Hey folks, I just got back from the body shop, the Greddy/Kenstyle body kit is on (both authentic). No fitment problems at all!! It's getting painted tomorrow. I'm so happy...but....
This thing is sooooooooo low!!!!!! I have the Eibach springs and combined with the Greddy front bumper, this thing sits like 3" off the ground! I can't even clear the driveway getting out of the body shop!! What springs can I get that will lower the car only .5"?? I will trade someone for other springs that will only give me a .5" drop or I'll buy if someone has something laying around. I need them by next Thursday. Thanks guys and gals! ~C |
That's funny, the prokit only gives 1inch drop.
|
It says 1 inch on the box...but it "settles" at about 1.5.
Whatever a drop claims...add another half inch at least. |
Originally Posted by inTgr8r
350Z springs will drop you .5"
|
| All times are GMT -4. The time now is 05:23 PM. |
© 2026 MH Sub I, LLC dba Internet Brands