350z S-Tech installation on 03 Sedan

SlipStreamSedan

April 16, 2009

9

0

Description:
Just spent good 3 hours BS'n and installing 350z tein s-tech on my 03 sedan 4/15/09

Read more »

So simple, 2 bolts and remove. Use stock rubber mounts

So simple, 2 bolts and remove. Use stock rubber mounts

0 2009/04/16 13:33:25 SlipStream

Compress stock spring. Use strong air impact. In my case I didn't have one so stick a crooked 17mm closed end wrench on strut bolt, vise-grip the square notch on the threaded part, and muscle the strut bolt loose.

Compress stock spring. Use strong air impact. In my case I didn't have one so stick a crooked 17mm closed end wrench on strut bolt, vise-grip the square notch on the threaded part, and muscle the strut bolt loose.

0 2009/04/16 13:33:25 SlipStream

Rear suspension assembly

Rear suspension assembly

0 2009/04/16 13:33:25 SlipStream

remove 3 bolts on upper strut tower

remove 3 bolts on upper strut tower

0 2009/04/16 13:30:36 SlipStream

Lower strut removal

Lower strut removal

0 2009/04/16 13:30:36 SlipStream

Remove upper arm balljoint link

Remove upper arm balljoint link

0 2009/04/16 13:30:36 SlipStream

Some of the tools used

Some of the tools used

0 2009/04/16 13:20:04 SlipStream

Remove nut holding brake line on the strut side

Remove nut holding brake line on the strut side

0 2009/04/16 13:20:04 SlipStream

Pull off the speed sensor line at both hooks on the strut

Pull off the speed sensor line at both hooks on the strut

0 2009/04/16 13:20:04 SlipStream