G35Driver - Infiniti G35 & G37 Forum Discussion
0 2019/09/15 07:35:15
You need to make it like that
You need to make it like that
0 2019/09/28 18:26:21
After
After
0 2019/12/19 15:03:07
Before
Before
0 2019/12/19 15:04:35
0 2020/01/16 15:27:50
0 2020/03/13 10:34:19
0 2020/03/13 10:34:20
0 2020/03/13 10:34:29
Bolts out, fluid drained, ready to drop transmission... my first time doing this on jack stands with the G. The secondary catalyst in one of my cats came loose after the O2 sensor, any clever tricks to keep in in place? I'm thinking about putting a screw through the cat housing to wedge it in place and sealing it with some JB Weld high temp.
Bolts out, fluid drained, ready to drop transmission... my first time doing this on jack stands with the G. The secondary catalyst in one of my cats came loose after the O2 sensor, any clever tricks to keep in in place? I'm thinking about putting a screw through the cat housing to wedge it in place and sealing it with some JB Weld high temp.
0 2020/03/20 08:25:36
0 2020/03/24 09:06:22
Turns out my initial diagnosis was close, but it was the 5-6 internal shifter ROD that cracked, the fork was fine.
Turns out my initial diagnosis was close, but it was the 5-6 internal shifter ROD that cracked, the fork was fine.
0 2020/04/05 09:23:47
0 2020/04/05 09:25:49
0 2020/04/05 09:26:28
Rod broke right on a 90 degree chamfer... Shoulda watched those stress concentrations when designing it
Rod broke right on a 90 degree chamfer... Shoulda watched those stress concentrations when designing it
0 2020/04/05 09:26:51
0 2020/06/10 07:19:17
0 2020/06/16 09:07:21
0 2020/06/16 09:07:32
my beater with the track G in the background
my beater with the track G in the background
0 2020/07/13 06:43:56
The course
The course
0 2020/07/13 06:44:02
0 2020/09/16 06:50:07
0 2020/09/16 06:50:11
0 2020/09/25 10:15:03
0 2020/09/25 10:15:06
0 2020/09/29 07:49:41
0 2020/10/13 13:06:45
0 2020/10/13 13:06:47
0 2020/10/13 13:11:23
Giant hole in front of wheel well after grinding out rust and covering in rust converter and inner frame coating. This is the reason I did this repair, to stop future structural damage
Giant hole in front of wheel well after grinding out rust and covering in rust converter and inner frame coating. This is the reason I did this repair, to stop future structural damage
0 2020/10/15 06:58:54
Driver side wheel well rust pre-"repair"
Driver side wheel well rust pre-"repair"
0 2020/10/15 06:59:00
Same side after grinding out "all* of the rust
Same side after grinding out "all* of the rust
0 2020/10/15 06:59:09
Mesh to support Bondo
Mesh to support Bondo
0 2020/10/15 06:59:14
Fiberglass sheet slathered over the first hole.
Fiberglass sheet slathered over the first hole.
0 2020/10/15 06:59:21
Fiberglass bondo added and sanded
Fiberglass bondo added and sanded
0 2020/10/15 06:59:28
I covered the repair in black plastidip and been daily driving this shitbox rain snow or shine ever since.
I covered the repair in black plastidip and been daily driving this shitbox rain snow or shine ever since.
0 2020/10/15 06:59:54
Cardboard "mold" to keep wheel well arch shape. I made this before chopping out the original rust.
Cardboard "mold" to keep wheel well arch shape. I made this before chopping out the original rust.
0 2020/10/15 07:02:09
3 years later.
3 years later.
0 2020/10/15 07:08:33
Other side wasn't half as bad
Other side wasn't half as bad
0 2020/10/15 07:12:22
0 2020/10/27 11:13:46