G35Driver - Infiniti G35 & G37 Forum Discussion
0 2020/02/23 23:25:18
0 2020/02/23 23:25:12
0 2020/02/23 23:24:59
0 2020/02/23 23:24:44
0 2020/02/23 23:24:31
0 2020/02/23 23:24:21
0 2020/02/23 23:24:16
0 2020/02/23 23:24:13
(I think this is Blue Dream's car?)
(I think this is Blue Dream's car?)
0 2020/02/23 11:52:40
0 2020/02/09 15:32:35
0 2020/02/03 22:37:04
0 2020/02/02 15:31:06
0 2020/02/02 15:30:36
0 2020/02/02 15:30:17
0 2020/02/02 15:29:56
0 2020/02/02 15:29:35
0 2020/02/02 15:29:15
0 2020/02/02 15:28:51
0 2020/02/02 15:28:22
0 2020/02/02 15:27:55
0 2020/02/02 15:27:29
0 2020/01/22 21:37:34
0 2020/01/17 17:54:02
0 2020/01/17 17:52:19
0 2019/12/28 11:27:06
0 2019/12/28 00:57:00
Without navi
Without navi
0 2019/12/19 10:00:01
With navi
With navi
0 2019/12/19 09:59:38
0 2019/12/15 15:26:07
0 2019/12/12 02:03:02
I adjusted it using this screw. I had use a small bit ratchet to get in there because there isnt much clearance behind it to fit a screwdriver.
I adjusted it using this screw. I had use a small bit ratchet to get in there because there isnt much clearance behind it to fit a screwdriver.
0 2019/11/01 17:55:28
Here is the hole and u can see the adjusting teeth in there. However, no matter how much I tried to adjust it using those teeth the screwdriver would just not turn freely. It takes quite a bit of turning to get the beam to move. So I got frustrated and used a dremel to cut off the plastic around it so I can adjust the beam using the screw on the back side.
Here is the hole and u can see the adjusting teeth in there. However, no matter how much I tried to adjust it using those teeth the screwdriver would just not turn freely. It takes quite a bit of turning to get the beam to move. So I got frustrated and used a dremel to cut off the plastic around it so I can adjust the beam using the screw on the back side.
0 2019/11/01 17:55:01
As for adjusting the headlights up/down, there is a hole on the headlight assembly itself where u can stick a phillips screwdriver in and turn the teeth to move the beam up or down.
As for adjusting the headlights up/down, there is a hole on the headlight assembly itself where u can stick a phillips screwdriver in and turn the teeth to move the beam up or down.
0 2019/11/01 17:54:38
0 2019/09/28 12:14:22
0 2019/09/28 12:14:14
0 2019/09/15 21:01:16
0 2019/09/11 17:15:03
0 2019/08/18 18:01:12
0 2019/08/18 18:00:59
0 2019/08/18 18:00:47