Review: Endless Super Sports-S Brake Pads
Review: Endless Super Sports-S Brake Pads
This thread is actually a continuation of a previous thread, but I thought I would create a new one with an appropriate thread title. Anyhow, I installed these pads on my '04 Coupe 6MT /w Brembos almost two weeks ago. You can get my initial review of the pads here:
https://g35driver.com/forums/brakes-suspension/86412-ordered-endless-super-street-sports-s-pads.html
Now after almost two weeks with the pads, I did notice some difference in performance.
Initial Bite: Improved bite from the previous week with predictable application of stopping power. Improved pedal feel.
Stopping Power: I haven't done any serious 60 - 0 or 45 - 0 stopping, so I cannot be definitive about improved braking distances with these pads.
Dust: It's been about a week and a half since I washed my car. So far none to minimal dust. Much improved over OEM.
Temp: Stats on these pads should allow me to go from street to mountain roads with ease. The Sports-S pads also allows for mild circuit activity as well.
Rotor Wear: I will be observing this to see if the pads are harsh on the rotors. So far, hard to tell, but I have to admit that the OEMs were quite forgiving and my rotors did not require any turning/resurfacing.
Will report more if anything changes. So far, thumbs up on these pads.
https://g35driver.com/forums/brakes-suspension/86412-ordered-endless-super-street-sports-s-pads.html
Now after almost two weeks with the pads, I did notice some difference in performance.
Initial Bite: Improved bite from the previous week with predictable application of stopping power. Improved pedal feel.
Stopping Power: I haven't done any serious 60 - 0 or 45 - 0 stopping, so I cannot be definitive about improved braking distances with these pads.
Dust: It's been about a week and a half since I washed my car. So far none to minimal dust. Much improved over OEM.
Temp: Stats on these pads should allow me to go from street to mountain roads with ease. The Sports-S pads also allows for mild circuit activity as well.
Rotor Wear: I will be observing this to see if the pads are harsh on the rotors. So far, hard to tell, but I have to admit that the OEMs were quite forgiving and my rotors did not require any turning/resurfacing.
Will report more if anything changes. So far, thumbs up on these pads.
Thread
Thread Starter
Forum
Replies
Last Post




